360 Ton High Efficiency Energy Saving Injection Molding Machine (AL-U/360C)

360 Ton High Efficiency Energy Saving Injection Molding Machine (AL-U/360C)Some of the important features: Clamping system:  Faster response, stable and high rigidity Injection system: Accurate and flexible, lower rejection rate Control system:  Computer and simple operation,molding data memory system Power system:    Energy saving, high efficient and precise Metal parts:    The thickness of our frame, metal plate and wallboard are thicker than other company.        Other Information Show High Precision: The accurate injection positioning,pressure, speed and pressure maintaining,to ensure the repeatability error of injection accuracy less than 0.3% to achieve precision molding. Super Energy-Saving Features: Compared with standard injection machine,the energy saving rate can reach 40%-70% for the same plastic production. High Efficiency: Compared  with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by18%. High Response System:The system acceleration and deceleration performance is quite agile and force&speed regulation is very sensitive.The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s. Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate. Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation.Improve the operation performance.promote using efficiency and save a large quantity of cooling water.  INTERNATIONAL CALSS NO                               360/2180SPECIFICATIONS                                U/360CScrew type  ABCD Injection   Screw diameter mm60677075 Screw L/D ratio L/D24.622 21.1 19.7  Shot volume(therretical cm3947 118112891480 Injection weight(ps) g862107511731347 Injection rate g/s278346378434 Injection pressure Mpa231186 170148 Screw Speed rpm                                     200 Clamping Unit   Clamping force KN                                    3600 Open stroke mm                                    675 Space between tie bars(W*H) mm                               680*680 Max.Mould height mm                                    720 Min.Mould height mm                                    250 Ejector stroke mm                                    180 Ejector force KN                                      70 Others   Pump max. pressure Mpa                                      16 Pump motor power KW                                      37 Heating power KW                                      24.7 Numbers of heating area segment                                      4+1 Machine dimension(L*W*H)m                             7.38*1.95*2.55 Oiltank cubage L                                     510 Machine weight t                                      13.5