Wet Separation CTB Series Iron Removing Drum Magnetic Separator

     CTB series Iron removing drum magnetic separator of wet separation Applications:1).Used for pre-concentration in the magnetic separation mill, remove the waste stones out of the ore and restore grade.2).Used for stope to recover iron ore from the tailings and increase the utilization rate of ore resources.3).Used for the iron and steel factories. Handle the discarded steel slag and mill scales to recover the iron.  Description of magnetic separator Magnetic Separators are designed to recover ferromagnetic materials. It's usually used for separation fine-grained iron magnetite from non-magnetic materials.It's applied for particle size less than 3mm magnetite, pyrrhotite, limonite and other materials, wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials in addition to iron work. Available downstream, semi-reflux, reflux-type and other forms of magnetic separator machine, cylinder surface magnetic field strength can be produced according to the actual use of the special.The main component parts of Magnetic separator is consisted with Geared Motor, Drum, Support Frame, Feed box, Drum Scraper, Magnetics discharge, Tank and Tailings discharge. Working principle of magnetic separator: When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.Technical parameters: ModelShell diameter (mm)Shell length (mm)Shell rotation speed (r/min)Feeding size (mm)Processing capacity (t/h)Power(kw)CTB60126001200