Automatic Paper Bag Making Machine with Twisted Handle Round Handle Online Popular Selling Europe

 OYANG-16 NEW WORLD A SERIES  Automatic Roll-fed Twist Rope Paper Bag Machine SeriesProduct ParametersHost Machine Parameters Model No.A 220A330A 400A 450A 460           A560Paper diameter≤1500mm≤1500mm≤1500mm≤1500mm≤1500mm         ≤1500mmCore inner diameterφ76mmφ76mmφ76mmφ76mmφ76mm           φ76mmPaper weight70-140gsm80-140gsm80-140gsm80-140gsm80-140gsm          90-140gsmPaper bag width120-220mm200-330mm200-400mm200-450mm240-460mm         280-560mmPaper Bag Width Without handle80-220mm150-330mm150-400mm150-450mm220-460mm         280-560mmPaper tube length190-350mm280-430mm280-550mm280-550mm320-650mm320-650mm         Paper tube length Without handle190-430mm280-530mm280-600mm280-600mm320-770mm         320-770mmBottom width of paper bag50-120mm80−180mm90-200mm90−200mm90-260mm           90-260mmPaper roll width290/370-710mm490/590-1050mm510/610-1230mm510/610-1230mm650/690-1470mm         770-1670mmMachine Speed150pcs/min150pcs/min150pcs/min150pcs/min130pcs/min         100pcs/minTotal power32KW32KW34KW34KW34KW          34KWMachine weight13000KG16000KG18000KG18000KG21000KG         22000KGMachine dimensionsL12×W5×H3.2ML14×W6×H3.5ML15×W6×H3.5ML15×W6×H3.5ML16×W6×H3.5M       L16×W6×H3.5M Handle Machine Parameters Model No.2HD3HD5HD6HDHandle rope height90-11090-11095-115100-120Handle patch width40-5045-5045-5045-50Handle patch length95114152190Handle rope diameter.φ3-5mmφ4-6mmφ4-6mmφ4-6mmDiameter of Handle Patch Paper Rollφ1200mmφ1200mmφ1200mmφ1200mmHandle patch paper roll width80-100mm90−100mm90−100mm90−100mmHandle patch weight.100-140g100-140g100-140g100-140gHandle separation distance47577695Product FeatureOyang 16- A330 full automatic square bottom paper bag machine is used for the production of a paper bag with a twisted and flat handle loop. Transmission of the handle made by handle making unit, cut, stick, pressed, and then pre-cut, glue, auto handle stick in empty or printed roll paper. Then the main machine will glue the paper with the handle loop to the edge, paper bag tube forming, cut off, indentation, bottom glue, bottom forming, and sealing, bag conveying. the whole process is completed simultaneously at one time. Real realization of full automation production, can effectively save labor costs.The whole machine adopts the servo-electric control system imported from Japan, which ensures the whole machine can run quickly and stably and effectively reduces the time of paper bag size adjustment. The finished bags produced are of high accuracy, strong stability, simple maintenance, and efficient production, which is the ideal equipment for major printing plants and paper bag manufacturers. Product DescriptionPart 1 Paper material feeding and convey Unit1. Roll feeding is equipped with an automatic lifting function, which is mainly convenient for changing roll paper during production, which can be easily completed by switch control.• Unwind using air shaft• Feeding is equipped with hydraulic cylinder lifting control system• Unwinding is equipped with automatic tension control system2. Fully automatic stroke correction system, the system is mainly to ensure the flatness and stability  of the feeding state of the roll paper.   Part 2 Twisted Rope Handle Making UnitThe twisted rope handle is fed by two rolls of raw paper and paper rope, and the roll of raw paper and the wound round paper rope are glued with water glue and hot glue; then the pressing device is used to transport and press the hand pull sheet. Close; then cut the handle in half and send it to the sticking mechanism. Part 3 Handle Convey and Pasting unitCut the delivered handle piece and then transfer it to the longitudinal push claw; the offset station will send the cut handle to the designated position of the bag mouth where the paper bag is to be produced; then give the handle and the paper bag a designated position. Water glue and glue, then press and fix the handle pasted on the paper bag and transfer it to the forming unit.  Part 4 Paper bag forming unitThe base paper with the handles pasted and the edge glue applied is made into a tube; the finished paper tube is hauled and transported to a single cutting according to the set requirements; then transferred to the big hub mechanism to open the four-corner bottom, and then the bottom glue is inserted and the bottom is inserted into the bag. The bottom becomes a square shape; then the bag is discharged from the conveying and pressing position.  Part 5 Finished bag collection unitThe formed paper bags are pressed and conveyed out of the bag. The bag discharging device receives materials longitudinally, and the receiving device can automatically count the finished products according to the requirements when they are discharged from the bag.Company Profile Zhejiang Ounuo Machinery Co.,Ltd.is located in Pingyang County Wenzhou City,Zhejiang Province, covering an area of 130000 square metres, 15 years deep ploughing in packaging equipment industry. Invest 200 million imported of Japan stability of the