80D26/80D26R 12V70ah Maintenance Free Sealed Lead Acid Automobile Rechargeable Car Battery

Basic Info.Model NO.80D26/80D26RAfter-sales Service1 YearWarranty1 YearTypeLead-acid BatteryRated Voltage 12V Charging VoltageNo More Than 0.3cWorking Voltage 12V Charging Type Constant Voltage Wet Shelf Life2~3YearDischarging Type Constant Resistance Electrolyte Acid Battery CertificationISO9001, CEBrandTylWeight16.1kgMaintenance TypeFreeCapacity70ahTrademarkTYLTransport PackagePalletSpecification258*173*200*220OriginGuangzhou, ChinaHS Code8507100000Product DescriptionProduct Description Battery Series SpecificationWET CHARGED MF BATTERY (CAR BATTERY)Battery Type VoltageVCapacityAh(10HR)Dimensions-Millimeters(±2mm)ApproxWeightKgLWHTH38B2012361951272002209.846B24124523712720022011.555D23126023017320022014.675D23127023017320022015.334-60126025917218020014.886-610126023017318020013.955D26126025817320022015.680D26127025817320022016.195D31128030417320022019.695E41R1210540417119921924.6115F511212050618020822032.0145G511215050622021023339.0544341244207173.518818812.558500125023317315717512.555515125524017517317313.278-60126025917818018015.5L2-400126024017419019014.057117127128617517517515.255415125428617517517514.857217127227617419019015.556618126627617419019016.358043128031417518018019.258815128835117418018019.5600381210035217419019020.820-1101211039417419119124.0Company Profile Factory IntroductionFounded in 1999, Guangdong Tongli Power Group is a comprehensive high-techenterprise integrating R&D, manufacturing and sales. It mainly produces automobile batteries, motorcycle batteries, electric vehicle batteries, energy storage batteries and solar power generation systems. One of the leading lead-acid battery manufacturers.We have advanced equipments for producing and testing, high-quality technical management team, from alloys, plates, battery tanks to finished batteries one-stop manufacturing, battery quality is reliable, cost-effective, the products sell well all over the world,and are well received by customers. In 2018, it waslisted in CCTV" Ingenuity" and was rated as the most ingenious enterprise.NoticePROCEDURE OF BATTERY REPLACEMENTDANGER OF EXPLODING BATTERIESBatteries contain sulfuric acid and produce explosive mixtures of hydrogen and oxygen.Because self-discharge action generates hydrogen gas even when the battery is not in operation,make sure batteries are stored and worked on i a well-ventilated area.Always wear safety glasses and a face shield when working on or near batteries. When work- ing with batteries:* Always wear proper eye, face, and hand protection. * Keep all sparks, flames, and cigarettes away from the battery. * Do not remove or damage vent caps. * Make sure work area is well ventilated.* Never lean over battery while boosting, testing, or charging.SAFE BATTERY INSTALLATIONTo assure safe installation and proper operation,follow these installation procedures:* Disconnect ground cable first (this is usually he negative cable;however, older vehicles may have a positive ground).* Remove battery - note position of positive(+) and negative(-)terminals.Mark the cables for correct connection to replacement battery.* Clean terminals and cable connections with a wire brush.Broken connections and frayed or cut cables should be replaced.* Install the replacement battery in the same position as the old one. Secure battery with the holddown assembly.* Make sure the terminals do not touch any metal mounting, engine, or body parts. * Connect cables tightly. Connect ground cable last to avoid sparks.SAFE CHARGINGBefore beginning the charging operation, read the instructions that come with the charger. Never attempt to charge a battery without first reviewing the instructions for the charger being used. In addition to the charger manufacturer's instructions, these general precautions should be followed:* Always charge batteries in a well-ventilated area and wear proper eye protection.* Turn the charger and timer "OFF"before connecting the leads to the battery to avoid dangerous sparks. Never try to charge a visibly damaged or frozen battery.* Connect the charger leads to the battery; red positive (+) lead to the positive(+) terminal and black negative (-) lead to the negative (-) terminal. If the battery is still in the vehicle, connect the negative lead to the engine block to serve as a ground. (If the vehicle is positive grounded, connect the positive lead to the engine block.) * Make sure that the leads to the connections are tight.* Set the timer, turn the charger on, and slowly increase the charging rate until the desired ampere value is reached..* If the battery becomes hot or if violent gassing or spewing of electrolyte occurs, reduce the charging rate or temporarily discontinue the charge.* Always turn the charger "OFF"before removing charger leads from the battery to avoid dangerous sparks.After Sales ServiceSERVICE CONTENTPre-sale servicesproduct consultation, product selection, project/product design, etc.In-sale servicesbattery installation, supervised installation, capacity testing, techni