Mining Use Product Diamond Enhanced DTH Hammer Diamond Button Drill Bit Rock Drilling Bit

Quick DetailsPlace of Origin: Wuhan, China Brand Name: REETECModel Number: SD/BR/COP/DHD/QL/Misson Type: Diamond Enhanced DTH BitsMachine Type: Drilling Tool Certification: ISO9001-2008Material: Carbide, PDC buttons Use: Oil/Gas/Well/Geological DrillingUsage: High pressure DTH toolsAdvantages:1. More than 15 years PDC research and manufacturing.2. PDC button DTH bits have excellent wear resistance and impact resistance, can increase drilling footage and improve service life.Conditions:Abrasive Condition, Hard ConditionPackaging & DeliveryPackaging DetailsWooden caseDelivery TimeWithin two working weeks after receiving your paymentPDC DTH bit SpecificationCompared with traditional carbide DTH bits, diamond DTH bits have the following advantages;   1.The service life of the DTH bit is increased by more than 6 times; 2.The overall tool cost of the opreation decreased by more than 30%; 3.The production efficiency of the operation is increased by more than 20%; 4.It can better maintain the quality of the well hole; 5.Make the target application that was impossible to complete once become possible; 6.Reduce the frequency of tool replacement and reduce the  labor intensity of workers.HEAD DESIGN      Concave Front: This head shape is suitable for all rock formations, especially in medium-hard condition and uniform rock condition.      Flat Front: This head shape is suitble for drilling very hard rock conditions and abrasive conditions.      Convex Front: This head shape is suitable for soft or nedium-hard rock conditions, and the bit body is not easy to wear.PDC button shape Spherical PDC button, gauge button, suitable for very hard rock.Ballistic PDC button, front button, suitable for meduim abrasive, medium hard rock.Parabolic PDC button, front button, gauge button, suitable for meidum abrasive, hard rock.Flat PDC button, guage protection.DTH Bit SizeShank styleDiameter in mmNO. Air HolesGauge PDC ButtonsFront PDC ButtonsApprox. weightPart numberDHD3.58526*φ134*φ125.0 kgsDHD3.5-859026*φ144*φ125.8 kgsDHD3.5-909526*φ145*φ125.9 kgsDHD3.5-9510026*φ146*φ126.1 kgsDHD3.5-10010528*φ136*φ126.3 kgsDHD3.5-105DHD34010526*φ145*φ138.6 kgsDHD340 -10511027*φ146*φ138.8 kgsDHD340-11011527*φ147*φ139.0 kgsDHD340-11512028*φ147*φ139.5 kgsDHD340-12012728*φ147*φ149.9 kgsDHD340-127DHD35013327*φ167*φ1415.0 kgsDHD350-13514027*φ197*φ1416.5 kgsDHD350-14014628*φ197*φ1417.0 kgsDHD350-14615228*φ198*φ1417.8 kgsDHD350-15216528*φ198*φ1618.5 kgsDHD350-165DHD36015228*φ198*φ1623.3kgsDHD360-15216528*φ198*φ1625.2 kgsDHD360-16517128*φ1910*φ1625.8 kgsDHD360-171190210*φ1912*φ1628.5 kgsDHD360-190203210*φ1914*φ1629.5 kgsDHD360-203DHD380203210*φ1914*φ1648.1 kgsDHD380-203216210*φ1914*φ1652.0 kgsDHD380-216241212*φ1918*φ1658.7kgsDHD380-241254212*φ1921*φ1660.4 kgsDHD380-254292212*φ1921*φ1680.1 kgsDHD380-292 Quality ControlReetec achieved ISO certification in 2010. REETEC'S certified quality program ensures the best possible product consistency and uniformity for each of our product, and guarantees the delivery of defect free products and 100% customer satisfaction.REETEC has set up a new performance test laboratory, and uses world-class testing and inspection equipments both for product development and for quality control. We subject our cutters to rigorous testing, to ensure REETEC cutters meet the highest quality standards.PRODUCTION AND TESTVertical Turret Lathe (VTL) Heavy Wear TestREETEC's premier test apparatus is the large VTL used for performance and high-energy testing of PDC cutters.The VTL machine is equipped to perform both wet and dry PDC tests, in granite and composite cement samples. As the PDC cutter cuts through miles of granite, we monitor temperature and cutting forces, and measure cutter wear volume periodically and at the end of the test. This allows us to evaluate cutters' aggressiveness, efficiency, abrasion resistance and thermal stability.Impact Resistance TestThe drop impact test evaluates the impact strength of our PDC cutters. This test emulates the type of loading that might be encountered when the bit transitions from one formation to another or experiences lateral and axial vibrations.Drop impact testing is part of PDC development. It screens cutters to make sure they are not too "fragile". While this is an industry-standard test, it should be noted that the drop impact test does not duplicate all impact-related downhole conditions. Other test development efforts for impact resistance testing are underway.Simulated Brazing TestSimulating the actual brazing environment, we run three simulated brazing cycles for thermal proof testing. After each brazing cycle we check for cracks and delamination using dye-penetrant testing and ultrasonic C-Scan. Brazing tests insures that the customer will not experience problems in brazing PDC cutters into bits, and in repairing PDC bits.EXHIBITIONCONTACT  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1