Plastic Film Paper Cup Laminating Machine Laminator Single Layer Lamination Machine

  PP PE Lamination Production MachineProduct Processing:After the plastic is melted, it is extruded in a high-temperature molten state with paper, kraft paper, non-woven fabric, aluminum foil, lining cloth and other series for high-speed coating composite to achieve the ideal tensile strength, compactness, barrier property, and improve the moisture resistance of the material . Advantage:Adopt double-station automatic reeling and changing device Magnetic powder tension designConstant tension control Production acceleration and deceleration can be controlled by synchronous ratioOnline scrap recycling systemThe speed can reach 50m/min, 100m/min, 150m/min. Machine Size and Model:Paper lamination machineKraft Paper lamination machineNon-woven fabric lamination machineAluminum foil lamination machineInterlining lamination machineMachine specifications1200/1400/1700mmEffective widthMAX 1100/1300/1600mmMechanical speed300m/minScrew diameterGSD-100mm/GSD-115mmExtrusionMAX 400kg/h or 550kg/hUse resinLDPE/PP/PBS/PLA Coating thickness15~45μmRewinding and unwinding diameterUnwind MAXφ1500mm;Winding MAXφ1800mmUse substratePaper(100~400g/)Dimension(Length×width×height)Double sided:30.7×(9.5~11)×3.8mSingle side:21.5×(9.5~11)×3.8m Production Processing:1.0A double station unwinding system1 set2.0Screw feeding device1 set3.0Hopper dryer 1 set4.0Extrusion Model SJ-90*321 set5.0Single board single station filter1 set6.0Solution static mixer1 set7.01250mm Laminating Special Mould1 set8.0Laminating composite molding system1 set9.0X automatic measure thickness device1 set10.0B double station unwinding system1 set11.0Correction device1 set12.0Fabric static elimination device1 set13.0LED lighting observation device1 set14.0Shearing pneumatic cutting knife set1 set15.0Edge air conveying device1 set16.0Tractor1 set17.0Double station automatic winding system1 set18.0SIEMENS Control System1 set  Components and DescriptionsMainly screw extruder: The extruder adopts the special screw design of the company's laminating machine. It is characterized by low calorific value, good plasticization, less fine points and superior products for PP/PE materials.                                                                                 screw diameter: φ90  Aspect ratio: 32:1 Structure: Single screw Heating power: 40KW.Deceleration machine: Hard tooth surface made of alloy steel after repeated heat treatment. The tooth surface is specially ground to ensure stable operation, low noise, and circulating cooling device.   Main engine: Simense Motor    Rated power: 90KWHost frequency conversion: ABB inverter Single Board Single Station FilterAfter the filter plate is produced for a period of time, the plastic melt enters the flow channel, and when a predetermined pressure difference is formed, the mesh should be changed. The net change work pushes the ram to move accordingly through the hydraulic system, prompting the filter plate to exit the working position while the other filter plate enters the working position, and then opens the protective cover when stopping the movement. Use the tool to quickly clean the melt around the gate and the filter hole, remove the old filter mesh, and replace it with a new one to complete the job. This machine is equipped with a network front pressure sensor and display to monitor the blockage of the filter to ensure timely network change. The friction pair of the screen changer is made of high-hardness and wear-resistant material to ensure long-term use.Solution Static MixerThe energy-efficient static mixer has a special structure of mixing elements, which are composed of a plurality of intersecting steel bars (bars) arranged at right angles, separated by a 45 degree angle, so that the melt flowing through is divided and merged multiple times. The orientation is changed to further promote the uniform dispersion and plasticization of the melt. It is usually used in extruders with very high precision requirements.Lamination Composite Molding SystemHigh molding cooling capacity and excellent temperature uniformity A film having a small roll unevenness and a uniform thickness can be obtained. Since the surface of the roll is molded and precision machined, high speed and stable operation can be achieved.Double Station Unwinding SystemThe structure adopts a double-station servo unwinding device, which has high stability and maneuverability. It has a small unevenness and can obtain a very stable unwinding tension.Products Application:  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1