CD6180-2m 800mm Diameter Conventional Lathe Horizontal Engine Lathe

                                          CD6180 SERIES HORIZONTAL LATHE       CD6180 series is horizontal lathe used for machining various kinds of steel parts. It is especially suitable for mass production of machining inside and outside cylinder surface, end surface, metric and inch thread etc. It can also perform the function of drilling and boring hole.     Main features:1. Dynamic sliding bearing is adopted on spindle nose. The bearings have betterprecision and obtained state patent.2. The spindle has 18 manual speed grade. The speedrang of spindle is 12-1000 r/min. Large spindle bore (120 mm).3. The lathes are suppliedwith two systems both in metric and in inch.4. Electric system of different frequency andvoltage can be designed to meet the requirements of users.    SPECIFICATIONMODELS                                                           CD6180   CAPACITYMax. swing diameter over bed                 800Max. swing diameter over cross slide          550Max.swing on gap                                     -- Width of bed                                     410mmMax. length of workpiece                 2000   SPINDLESpindle nose                                          D11Spindle bore diameter                           120mmTaper of spindle bore                            1:20Range of spindle speed                      12-1000r/min 18 18Kinds    FEEDSLongitudinal feeds range                  0.082-1.59mm/r 35 35KindsTransversal feeds range                  0.027-0.522mm/r 35 35KindsMetric threads range                      1-192mm 57 57KindsInch threads range                         2-24/ 30 31KindsModule threads range                    025-48mm 40 40KindsPitch threads range                        1-96/ 36 36Kinds    TAILSTOCKTaper of tailstock sleeve 5                  Morse No.5Travel of tailstock sleeve                    250mmDiameter of tailstock sleeve               100mm    MOTORSMain motor power                            7.5kWRapid motor power                           0.25kWCoolant pump power                         0.125kW  Standard Accessories  1. Three jaw chuck 1 set                               6. Foundation screws 1 set2. Center sleeve                                             7. Wedge nuts 1 set3. M.T No.5 center 2 sets                              8.Operational manual 1set4. Oil gun 1 set5. Tools 1 setSpecial Accessories (1500mm and above 1500mm length is standard configuration, 1000mm and below 1000mm length is special order)1. Steady support2. Follow rest3. Four jaw chuck4. Face plate5. Drive plate/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1