Earthmoving Machinery Cheaper Price Chinese Grader Motor Grader/ Road Grader/ with Front Blade and Rear Ripper -Horsepower Model Gr135/Gr165/Gr180/Gr215

  1. GR135 adopt Dongfeng cummins 6BT5.9-C130-II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption. 2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability  Item GR135 Basic parameters Engine model 6BT5.9-C130- Rated power/speed 97(2200r/min) Overall dimension (standard) 8015X2380X3050 Total weight (standard) 11000kg Tire specification 13.00-24 Ground clearance (front axle) 515mm Tread 2020mm Space of front and rear axles 5780 mm Performance parameters Forward velocity 5,8,13,20,30,42km/h Reverse speed 5,13,30km/h Tractive effort f=0.75 61.3kN Maximum gradeability 20% Tire inflation pressure 300kPa Working system pressure 16MPa Transmission pressure 1.3-1.8Mpa Working parameters Maximum steering angle of front wheel ±49° Maximum slant angle of front wheel ±17° Maximum oscillating angle of front axle ±15° Maximum oscillating angle of equilibrium box ±16° Maximum steering angle of frame ±27° Minimum turning radius 6.6m Scrape knife Maximum lift height 410mm Maximum cutting depth 515mm Maximum tilt angle 90° Cutting angle 54°-90° Angle of revolution 360° Length & chord height 3660x610mm Oil filling amount Coolant 50L Fuel tank 280L Engine 18L Transmission 26L Hydraulic oil 96L Drive axle 28L Balancing box 46 L CONTACT US:/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1