12 Meters Sinotruck HOWO 4X2 Extended Boom Arm High Altitude Operation Hyraulic Lifting Cage Truck

12 Meters Sinotruck HOWO 4X2 Extended Boom Arm High Altitude Operation hyraulic lifting Cage Truck   ITEMUNITPARAMETERVehicle high altitude work truckOverall dimensionmm7400x1980x3110GVWkg  4325Curb weight4000 Payload325Wheel basemm3300F/R track base 1506/1466Approach/departure angle°19/11Suspensionmm1032/1968Max speedkm/h95Drive system4x2SteelPower,Tire specification7.00-16/7 unitsNumber of axles2Engine model   ManufacturerDongfeng Chaoyang Chaoyang Power Co., Ltd./CY4100QEmission/kw3707ml/66Kw, 90HptypeFive gear transmissionConfiguration1, Double cabin2, Air condition3, With USB interface radio4, Oil brake with vacuum booster pump4, working height 10m The high altitude aerial work truck can be used for overhanging work, crossing certain obstacles or lifting at one place for multi-point operation; the platform has a large load capacity, which can be used for two or more people to work at the same time and can carry certain equipment; Good sex, convenient transfer site; beautiful appearance, suitable for indoor and outdoor work and storage. Applicable to a wide range of high-altitude operations such as stations, terminals, shopping malls, stadiums, residential properties, factories and mines.Trailer-type folding arm aerial work vehicle, easy to move, compact folding arm structure, adopting new high-quality steel, high strength, light weight, direct access to AC or starting with its own DC power supply, fast erection, worktable can be raised and It is ideal for aerial work equipment because it extends horizontally and can also be rotated to easily reach obstacles across the working position.There are control devices in the working bucket and the rotary seat, which can control the start/stop of the engine from a long distance, high speed/low speed, and use the electro-hydraulic proportional valve to control the movement of the arm. The smoothness is good, and the working arm can be 360° left and right continuously. Rotating, the link mechanism automatically maintains the level of the working slot. When the main pump fails, the emergency pump can be operated to lower the working slot, and it can be illuminate at night with heavy lighting. The legs of the car are separately separated and adjustable, and the vehicle can be leveled on the uneven road. The whole vehicle is easy to move and can be used for narrow lots and small streets. Products are widely used in electric power, street lighting, municipal, garden, communications, airports, repair (repair) ships, transportation, advertising, photography and other high-altitude operations. Exhibition Folding boom aerial work truck.1. The worktable is designed with mechanical self-balance, which is used to keep the worktable in balance during operation. The large extension angle of the jib reaches 65 °, so that it can be adjusted to a good working position. (The measurement method of jib extension angle is different, and some manufacturers mark it as 90 °) 2. The upper and lower operating systems can complete various operations on the platform and turntable. 3. Night work light, the operation light can be installed on the operation platform according to the customer's working environment to make night work safer. 4. The outriggers can be adjusted independently. Each outrigger can be adjusted independently according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state. 5. The outrigger adopts the front and rear H-shaped structure, with larger stress surface and higher stability; It can prevent the girder from deforming or breaking (note: if the front V and rear H models are used for the outriggers, the girder is likely to deform or break due to the head hanging upside down after a long time of use). 6. The four vertical outrigger cylinders and the upper arm, lower arm and lower arm cylinders are equipped with two-way hydraulic locks, whose function is to lock the cylinder after reaching the required position to prevent accidents. The working arm is equipped with a two-way balance valve to make the operation of the working arm more stable.  Telescopic boom aerial working truck.1. The aerial work vehicle adopts a telescopic straight arm structure. The operating arm is a four-section telescopic type. The turntable can be operated, and can also be operated by a remote control. It can rotate 360 degrees. Four hydraulic outriggers are available. The maximum weight of the platform is 200 kg. The stainless steel coaming and patterned anti-skid walking platform are available. 2. The worktable is designed with mechanical self-balance, which is used to keep the worktable in balance during operation. The maximum extension angle of the jib reaches 80 °, so as to adjust to the best operation position. 3. Night work light, the operation light can be installed on the operation platform according to the customer's working environment to make night work safer. 4. Computer control, automatic limit, dangerous work alarm, exc