5000mm Glass Double Edging Line Compatible with Cutting, Drilling, Washing, Printing, Tempering, Laminating, Sandblasting

This high intelligent line is launched to satisfy the market and customer's requirement of flat glass processing, which innovated on the basis of our reliable glass double edging machines with connecting equipment for increasing automation and saving labor. This line is composed of following equipment:Glass Measuring Table:  HTT5030MDouble Edging Machine:  HEM2450"L" Shape Transfer Table:  HTT5030LDouble Edging Machine:  HEM2430This specialized line is designed for grinding 4 edges of flat glass with arris & Low-E deletion automatically, rough grinding, fine grinding and polishing have been finished at one processing travel.  After the glass is sent to the measuring table, the actual size of the current glass is detected by the measuring table, and the system optimizes the data according to the user's settings. The processed dimension data will be sent to 1 # and 2 # high-speed double edging machines respectively according to the actual direction.After receiving the size, 1 # and 2 # bilateral machines adjust it according to the actual situation of the current machine, and then process the glass. 1 # and 2 # units independently process the size data received by themselves, and optimize the process according to the comparison of the data before and after receiving. If the current size is the same as that of the next glass in Unit 2, the next size does not need to wait for the current glass to finish grinding before feeding, but can be directly allowed to feed, so as to save grinding time. If the current size is inconsistent with the next glass size, the transfer table can be controlled to send the glass to the entrance of machine B for waiting.This is high efficient equipment with high output, less labor consumption, it's a perfect machine for mass glass production, Our machines are manufactured under strict standard and techniques, Reliable, high efficiency, stability and intelligent is the main characters of our machine, which help our customer to enlarge the business will reliable quality.  Work flow:The glass is loaded onto measuring table HTT5025M, glass data will be automatically measured and set to PLC of double edger, then the glass will be transferred to 1st double edging machine HEM2450 for processing of 2 edges, the direction of glass flow will be changed at 90°degree when glass arrived transfer table HTT5025L and then glass will be transferring to 2nd double edger HEM2425 for processing of other 2 edges; then glass comes to the washing machine for washing and drying process; at the last glass will be unloaded. this double edging line is compatible with glass tempering furnace, glass screen printing, laminated glass line, and so on.  Functions: Connection control function: the system is equipped with the touch screen of 1 # machine as the master control station as the standard configuration, where the whole line can be started and stopped, including the basic control of 2 # machine, the transfer table control, and the measuring table control. The touch screen on Unit 2 can only control Unit 2. User management: the system provides three levels of user groups. The password can be modified or users can be added/deleted at will. Information monitoring: The system provides complete equipment information reflection. When the equipment has a fault or other protection alarm, in addition to displaying the fault information in the form of a riding lamp at the bottom of each operation page, the "information monitoring" page is also provided for users to view all alarm information, real-time status of PLC input and output points, production output status and other related information. Edge grinding process optimization: it could only be used in the bulk order mode. When this function is enabled, the glass will accelerate when it is not in contact with the grinding wheel (when entering and leaving the machine) to save the grinding cycle time. Feeding allowance recognition function: also known as secondary detection function, it is used to detect whether the glass sent exceeds the designed standard allowance in real time (different allowance and reference speed correspond to different thickness of glass). If the glass exceeds the allowance, it will be decelerated according to the proportion of excess allowance to ensure the safety of glass processing. Real time energy saving function: the system has provided sleep function (default is 1 minute). When no glass enters after the sleep setting time, the system will stop all grinding wheels, water pumps, fans, etc. and enter the sleep state. When glass enters, it will be automatically awakened for operation. Real time energy saving is a further energy saving on this basis. The system will automatically detect the position of the glass. When the glass is not in the effective edging area (that is, the contact area between the glass and the grinding wheel), the system will slow down the grinding wheel motor to save power. Interlocking/synchronization of washing machine