1.Shaking Table Introduction:Shaking table is widely used for
sorting tungsten ore. Its main function is sorting the rough and
concentrate mixture after tungsten ore gravity separating. (Such as
rough concentrate sorted by jig and shaking table). Process
particle size is ranging from 2 mm to 0.074 mm. The separating
effect is especially for tungsten ore with a variety of sulfide
minerals. It has the following advantages compared with the gold
table: it is easy to observe changes of slurry on shaking table;
easy to operate; it has many different specifications for choosing.
It is proved by a large number of actual production data and
feedback from the customer after-sales information that this
gravity mineral separating shaking table is simple operation in
production process. The separation effect is especially prominent
for tungsten mine including sulfur and other Sulfide Minerals.
Secondly, its capacity is larger than 6-S shaking table. Its
overall production costs are much lower than 6-S shaking table.
2.Shaking Table Working Principle:The working principle of shaking
table is to use the combined action of the specific gravity
difference of sorted minerals, alternating movement of bed surface,
and transverse oblique water flow and riffle (or notch groove), to
allow loose layering of ores on the bed surface and fan-shaped
zoning. Then different products can be produced. This machine is
composed of three parts, i.e. head of shaking table, surface of
shaking table, as well as bearing and adjusting gradient. 1. Head
of shaking table: This is eccentric connecting-rod type mechanism.
The motor drives the eccentric shafts to rotate and the connecting
rod to move up and down. When the connecting rod pushes down the
toggle plate compression spring, the pull rod drives the table
surface to move in the direction of table head. When the connecting
rod pushes it upward, it, through the spring tension, drives the
table surface to move in the opposite direction. When they are
linked, the rotating motion of eccentric shaft is changed into
horizontal alternating differential motion of table surface. 2.
Shaking table for gold table surface: It is mainly composed of
vibrating roof, steel skeleton, glass fiber reinforced plastics and
wear-proof surface, feed water tank, feed chute, and draw bar. The
table surface adopts steel skeleton FRP composite structure. That
is, glass fiber reinforced plastics are pasted on steel skeleton to
form a solid glass fiber reinforced plastic surface. Its above uses
abrasion-proof materials to make surface and riffle (notch groove).
3. Bearing and Adjusting Gradient Mechanism: Shaker table for gold
The bearing and adjusting gradient mechanism is mainly composed of
shaking support plate, adjusting seat board, saddle seat, and
adjusting screw rod. The shaking support plate enables the table
surface to make arc forward and backward alternating movement on
vertical plane. The shaking support plate and shaking box are fixed
on the adjusting seat board with gripping channel steel. When hand
wheel regulating screw rod is used to get the adjusting seat board
to rotate on the saddle seat, the Transverse gradient of table
surface can be adjusted. 3.Shaking Table Applications:Shaking table
is a mine separation device for fine minerals working by gravity.
They are effective in processing precious and base metal, rare
metal and non-metallic minerals, widely used in separation for
Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten,
Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper,
Aluminum, etc. 4.Shaking Table Structure:5.Technical Parameter of
Shaking Table:NameCoarse sand surface of tableFine sand surface of
tableOre slime surface of tableTable surfaceLength
(mm)445044504450DimensionTransmission end width
(mm)185518551855 crude ore width (mm)154615461546Max. feeding
size (mm)20.50.15Feed amount (t/h)30-6010-2015-25Feed density
(%)25-3020-2515-25Capacity (t/h)0.6-2.50.6-2.50.6-2.5Stroke
(mm)16-2211-168-17Frequency ( f)45-4848-5350-57Water quantity
added(t/h)80-15030-6010-17Horizontal obliquity
(°)2°30′-4°30′1°30′-3°30′1°-2°Longitudinal obliquity
(°)1.40.92--Dressing Area (m2)7.67.67.6Cross-section Shape of
table surfaceRectangularSaw tooth triangleMotor Power
(kw)1.11.11.1Transmission MechanismEccentric linkage6.Successful
Case:7.Packing & Delivery:8. About Our Factory:Jiangxi Hengchang
Mining Machinery Manufacturing Co., Ltd. is located in No.3
Chuangye Road. Guzhang In dustrial Park. Shicheng County. Ganzhou
City. Jiangxi Province. China.Our company is engaged in the mineral
processing equipment research, development, design and production
for many years history, has accumulated rich experience in design
and production. Enterprise in mineral processing equipment industry
has had a positive effect, set up the good reputation. And mainly
the manufacture of the products like as Shaking table. Flotation
equipment. Crushing equipment. Magnetic separator. Screening
equipment. Class
Related products about Mining Processing Beneficiation Plant Rock Gold Ore Gravity Separator Shaking Table Tin Ore Separation Equipment
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup