Solar Panel Batteries Recycling Machine Car Lithium Battery Separation Equipment

Product DescriptionBrief Introduction The waste batteries are sent to the shredder by the conveyor for shredding, the shredded materials are sent to the secondary multi-knife shredder through the conveyor for secondary crushing, and the secondary shredded materials enter the conveyor and set at the same time. The magnetic separation equipment can separate the iron in the material. The separated material is sent to the air separator through the conveyor, and the diaphragm paper in the positive and negative electrodes is separated by the induced draft fan and the cyclone feeder. The selected positive and negative plates enter into the three-stage pulverizer for fine pulverization, and the material is pulverized to about 20 mesh. The pulverized material enters into the cyclone separator from the negative pressure system for dust filtration, and is separated by two airflows to separate the materials of different densities into layers, and then the positive and negative electrodes and copper, aluminum, nickel and other materials are obtained. And all the ultrafine dust is brought into the pulse dust collector by the negative pressure system for collection. The filtered exhaust gas will continue to be sent to the exhaust gas treatment equipment by the negative pressure system for air purification, so that it can meet the national emission standard before being discharged at high altitude.Technical parameters:ModelPower (Kw)Capacity (Kg/H)Dimension (m)BYPC300102200-30020*5*5BYPC500134400-50025*6*5PYPC800194600-80030*6*5BYPC1000238800-100035*8*5Our AdvantagesAdvanced new technology of mechanical crushing and high-voltage electrostatic separation is adopted. After crushing and dissociation, metal and non-metal objects are sorted, with high purity The key technology is to organically combine the special crushing and dissociation equipment for various waste circuit boards, so as to achieve a large energy-saving effect in the production process, and achieve a high metal separation rate This production line is an upgraded product of wind-selection type. Compared with wind-selection type, this production line consumes less power, has no noise, less manual work, high automation procedures, improved efficiency, and occupies a smaller area. It is a waste electricity (line) circuit. Board recycling to the most ideal production line. Packaging & ShippingCompany ProfileBaoyuan Machinery is a comprehensive enterprise that comprises R& D, test, manufacture, sales and service functions. We have succeeded in researching and supplying solutions with the following equipment: Drying equipment, activated carbon production equipment, building materials equipment, beneficiation equipment, crushing equipment and other products.With our leading-edge technologies, advanced processing equipment and our corporate spirit of "innovation, pragmatism, unity, hard work and dedication", our company has the strength to meet the challenges from all aspects. We have the confidence to build "Baoyuan" into a world-renowned brand, provide quality services for the dryer and building processing industry, and achieve a win-win situation between the company and customers.