PVC EPE EPS Sole Plastic Compounding Granulating Extrusion Cutting Machine

Product DescriptionPelletizer for Granule Productions/Plastic Extruder granulator machinesGranulator can be used in the process of various plastic granulation particles, which can be used for PP,PE,PS,ABS,OPPand otherplastics to granulate. For several characteristics and advantages of granulator, it is particularly remarkable in the following places:1) The screw part is carefully developed and designed, the whole machine and each part are equipped reasonably, and all the linesare heated by three fires and one zero.2) The screw is designed according to the characteristics of the material, so the granulator has high efficiency and speed, theproducts produced have strong gloss, the particle size is full, the configuration of the whole machine is increased, and theservice life of the equipment is added. In the appearance aspect has also carried on the rationalization design, therefore has theunique aesthetic feeling.3) This granulator adopts reasonable design, the production volume has also been greatly improved, the finished productperformance-price ratio is higher, the maintenance time is reduced, so the maintenance cost of users is also reduced.4) The characteristics of high output and low energy consumption are equipped with large torque reducer and motor, and the screwis specially designed and processed. No dead angle, no iron jam, effectively improve the production capacity, enhance the plasticplastic effect. Equipped with single exhaust double exhaust structure, full drainage, exhaust, so that the particles are more strong and full.5) High quality electrical and driving equipment to make the granulator more safe and reliable in the process of use.Detailed PhotosMain Features:1. Feeding way of plastic pelletizing recycling plant: Special designed force feeder, side feeder and compactor can push the material into the extruder high efficiently. Guarantee getting good capacity of the machine2. Gear reducer of plastic pelletizing recycling plant: The high torque, hard-surface gear reducer with water cooling circulation system ensures the line running steady, silent, and long life.3. Barrel and screw of plastic pelletizing recycling plant: The special material (38CrMoA1A & double alloy) and hardness treatment of the screw and barrel make extruder to be good wear resistance.4. Degassing of plastic pelletizing recycling plant: Special design for the venting can discharge the moisture and waste airefficiently which ensure the finally plastic granules are with smooth surface, no water, no bubble, and good quality.5. Hydraulic filter of plastic pelletizing recycling plant: Double position hydraulic filter works swift and easy to operate.Copper ring prevents the material leakage.6. Cutting way of plastic pelletizing recycling plant: Two type cutting way, the noodle type and water ring type makes thecustomer freely to choose.7. Special designed die of plastic pelletizing recycling plant: All die holes size are special designed due to the materialcharacters and our rich experience to make machines.8. Cooling way of plastic pelletizing recycling plant: Most of the materials are cooled by water. Some like PVC are cooled by wind. e with smooth surface, no water, no bubble, and good quality.9. Cutting way of plastic pelletizing recycling plant: pineapple cutter is for the noodle cutting way, and die face cutter for the water ring cutting way.10. Package of the final products of plastic pelletizing recycling plant: Final products granules will be blowing into silo, which will be packaged by manual or packaging scale machine11. Electric parts of plastic pelletizing recycling plant: Siemens, Schneider, Fuji, ABB, Mitsubishi, TECO all electric partscustomized.. Specification Model Diameter of screw PE capacity PP capacity DDJ-85 Φ85mm 150-200kg/h 150-200kg/h DDSJ-85/85 Φ85/85mm 150-200kg/h 150-200kg/h DDJ-100 Φ100mm 280-350kg/h 250-300kg/h DDSJ-100/100 Φ100/100mm 280-350kg/h 250-300kg/h DDJ-130 Φ130mm 480-550kg/h 400-500kg/h DDSJ-130/130 Φ130/130mm 480-550kg/h 400-500kg/h DDJ-160 Φ160mm 650-800kg/h 600-750kg/h DDSJ-160/160 Φ160/160mm 650-800kg/h 600-750kg/h DDJ-180 Φ180mm 800-1200kg/h 750-1000kg/h DDSJ-180/180 Φ180/180mm 800-1200kg/h 750-1000kg/h   The plastic recycling granulator for the rigid hard material Advantage: 1.Belt feeding,frequency conversion control. Can be equipped with metal detector. 2.The pot body is equipped with a guide plate for convenient feeding. Improved knife plate and fixed knife,to promote the speed and effect of the granule. 3.Special design can control the temperature of the material inside the compacting-machine pot,so as to improve the granulation efficiency.       Model Diameter of screw PE capacity PP capacity TCDJ-65 Φ65mm 80-130kg/h 70-120kg/h TCDJ-80 Φ80 100-160kg/h 80-130kg/h TCDJ80/80 Φ80 100-160kg/h 80-130kg/h TCDJ-90 Φ90 130-220kg/h 130-220kg/h TCDJ-90/90 Φ90 130-220kg/h 130-220kg/h TCDJ-100 Φ100mm 180-270KG/