YH-500HMYDMTG HARD WAY TURNING AND MILLING MACHINE WITH Y AXIS
1. Bed process structure: one-piece bed
structure Strong cutting ability and wide processing rangeBest
Optimization Structural Analysis Through structural analysis,
the main unit structure is optimized, and by reducing the height of
the equipment, it can also maintain the dynamic stiffness of the
bed during heavy cutting. High-strength HT300 cast iron integrally
formed strong structure bed. Medium-frequency quenching rectangular
guide rail (52-54°), precision grinding in one clamping, special
wear-resistant sheet on the slide plate, precision fit by manual
scraping, bearing seat, motor seat are assembled by scraping
mosaic. Moreover, the YH-500H series adopts a 30-degree inclined
bed, which greatly improves its processing stability and accuracy
retention. Separately integrated cutting fluid tank The coolant
tank is installed in front of the bed to prevent leakage and
maintain stability by using high-power coolant processing.
guideway:box guidewayAll axes of YH-500H series adopt
box-type guide rail design, which has better moving
ability. The box-type guide rail has a strong ability to
offset the vibration caused by cutting, reduce tool loss and
improve processing stability. Sealed built-in structure: The design
of the X-axis of YH-500H series adopts a sealed built-in structure,
which can minimize the damage to the turret by chips.
spindle:heavy cutting and high accuracyFor
the spindle for heavy cutting, the shaft design adopts the
structural design that is often used in large machine
tools. The combination of double cylindrical roller bearings
and angular contact ball bearings provides excellent heavy-duty
machining capabilities. In addition, the machinability is improved
by adopting multi-channel belts, and the problems of noise and belt
slippage are reduced. The spindle design adopts a labyrinth
structure to reduce the possible damage to the bearing caused by
the coolant and improve the machining stability. (2800 r/min) can
be used for high-speed precision cutting for users, suitable for
mass production and manufacturing complex shapes, Products with
high rigidity requirements, high precision requirements and high
finish.
tailstock heavy high rigidity structureServo
powered turret: Line rail structure, high rigid overall
design, with high precision three-plate radial clutch, to ensure
high positioning accuracy, repeat positioning accuracy, with servo
motor to drive the cutter head to rotate, for two-way or any nearby
tool selection, using hydraulic pressure The principle is to relax,
clamp the clutch, cooperate with the proximity switch to feedback
the clutch action signal, and quickly and accurately achieve the
tool change action, with good rigidity, precision, and dynamic
response characteristics manual scrap1. MT5 movable top, the
sleeve is extended hydraulically, the drag plate drags the
tailstock, and it is locked manually.Bed saddle, pallet, spindle
combined surface tailstock, screw seat, motor seat All are
manual shoveling assembly process. chuck and
cylinderTaiwan (Korea) high-speed rotary chuck oil cylinder is
adopted, and an automatic chip removal device is selected at the
same time, which can greatly reduce the labor intensity of the
operator and realize safe and efficient production. The above
functional components can be programmed and controlled, and can be
designed and installed according to the special requirements of
users Various special fixtures. Model parameters: unit
(mm) models Item YH-500HMY Main parameters swing diameter on
bed Φ680mm Maximum machining diameter Φ410mm Processing diameter on
slide plate Φ350mm Maximum processing length Maximum
turning length 380mm, maximum milling length 430mm Spindle and
Chuck Parameter Spindle Head Type A2-8(10") Spindle motor power
11-15KW (high torque motor) Maximum spindle speed 2800rpm Spindle
hole diameter Φ82mm Bar diameter Φ75mm Feed part parameters X/Z
axis screw specifications 3210/4010 X-axis limit stroke 250mm
Z-axis limit stroke 610mm X, Z axis motor torque 20N.M axis travel
±50 Y axis motor 11.8N.M X, Z axis connection method direct
connection Precision Machining precision IT6 Repeat positioning
accuracy 0.003mm Servo Turret Servo Power Turret
BMT55MY/ER32/4000/min Turret center height dimension 215 Tool
size 25×25 Boring tool holder size 40mm Power head motor 2.7KW
Power tool holder ER32/4000 rpm Tailstock part Quill diameter 100mm
quill stroke 80mm Tailstock maximum stroke 500mm Tailstock
sleeve tapered hole Morse 5# Appearance Bed form and inclination
(length×width×height) integral type 30° 3248/1650/1765 Weight
Weight (approximate weight) T 5T System FANUC TF (3 packages + the
first round of fallback function + helical interpolation function)
Configuration table of main purchased accessories: Serial number
Name and specification Quantity Origin/model 1 Bed cast iron 1 set
HT300 cast iron 2 systems 1 set of FANUC TF (3 packs + the first r
Related products about CNC Lathe Machine Hard Way Turning and Milling Machine with Y Axis
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup