200V 50A Redundant Thyristor Charger for Substation Maintenance

ApplicationKGCA charger is a new type special  charger for battery or for load. Charger contain DC Voltage Regulator, so charger can supply simultaneously to the battery and dc load with power. This system is controlled by digital intelligent with multi charge mode, simple operation and reliability, there is no phase sequence requirement. The transformer is made by high strength paint copper, it can achieve H grade high temperature resistance and isolation, the power units are made by aluminum profile and high-power disc type thyristor units with high performance and reliability. 2  Working conditions2.1The sea level of the working site shall not exceed 3000m.2.2The ambient temperature ranges from -10ºC to +50ºC.2.3The relative humidity is not higher than 95%.2.4There is no conductive dust, explosive gas, corrosive gas for metal, infective gas for insulation and steam around the site.2.5There is no violent vibration and slope lager than 5°on the site.2.6The ventilation on the site must be good.3  Technical parameters3.1Charger technical parameters3.1.1Input: three phase AC380V 50Hz(as per customer requirement), the allowable voltage tolerance for the line is ±5%.3.1.2power rate 36KVA.3.1.3The rated DC output current: 200A.3.1.4The rated DC output voltage: 50V.3.1.5The rated DC output voltage means the max. charge voltage, if the input AC voltage of the line is 10% lower than the nominal voltage, then the DC output voltage will be lower than rated voltage. The rated DC output current means the max. charge current during operation.3.1.6Functions: constant current, constant voltage3.1.7The accuracy for constant current: the accuracy for current is less than ±1% when the rated value ranges from 20% to 100%.3.1.8The accuracy for constant voltage: the accuracy for voltage is less than ±1% when the rated value ranges from 20% to 100%.3.1.9The running mode for the main circuit: three-phase full-bridge controlled rectifier.  4  Working Principle4.1Description There are triangle/star transformers to compose a three-phase full-bridge controlled rectification circuit. In this way it can carry out the  charge function. The contactor will control the conduction angle of the thyristors to change the output voltage and current. The charger contain DC Voltage Regulator, so charger can supply simultaneously to the battery and dc load with power. The fast acting fuse installed on the output terminal of the charger will cut off the DC circuit (main circuit) quickly to protect the batteries and thyristors if there is short circuit in the DC output or batteries.Two independent chargers , one as main and one as backup.5.Photos:6. Details:7. Testing:8. workshop: 9. Delivery:10. FAQ:A. Are u manufacturer?we are Subsidiary of Zibo Torch Energy ( which is a subsidiary of CSSC). Our group company manufacture different kinds of goods. We can sell all the products which are produced by ourself and by our sister companies. Like the machines for battery making, laser machines, charging system,  batteries, material for battery making etc.B. How long is the warranty?1 year warranty, and after one year we can provide spare part as per your order.C. How can we reach your factory?our Factory locates in ZIBO city, you can take train and reaching ZIBO station , or you can take flight reaching JINAN or Qingdao Airport. We will arrange the pickup.D. How long is the delivery time?Usually it depends on your products and the QTY,, the delivery time varies from 3days to 90 days.E. How to pay ?You can pay to our company account directly with the PI provided by us. We accept TT and L/C.F. What is the delivery terms?We can arrange the delivery by sea, by air and by express carrier, Such as DHL, TNT, UPS, Fedex etc. FOB, CFR and CIF are all OK for us. And the nearest port is Qingdao port.    /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1