Brief introductionTouch LCD is a car touch COP, including floor
touch buttons, elevator floors, elevator status, full view of
warning information and HD display. This LCD is easy to install and
easy to use. It can be embedded to be installed on COP.Performance
index Working temperature: -10~70ºC Storage
Temperature: -20~80ºC Relative humidity: 95%
40ºCElectric Spec Input voltage
DC20~60V Consumed
power
19.92W(21.5) CPU
Clock Speed
Cortex™-A9
1000MHz ROM space
4GB DDR3(The maximum can be
extended to 64GB) RAM space
1GB(The maximum can be extended
to 2GB) USB interface
USB2.0*3(Two terminals and a
pin) LVDS interface
2ch/24bit*1
1920*1080(MAX) HDMI interface
24bit1920*1080(MAX) I2C
1*2 Audio
One
Audio Line out L and one Audio Line out R
Ethernet
10M/100M*1(RJ45 with
indicator)Human-Computer Interaction
Support mouse, keyboard, touch screenVideo
Format
mpeg4,*.mp4Operating system
Android 4.3
Structure sizeScreen specification 21.5"Overall
dimension 21.5 350*650*28(mm)Display dimension
21.5 268*476(mm)Display parametersResolution
1920*1080Screen Ratio
16:9Luminance
250cd/m2Contrast ratio
5000:1Color
16.7M
Visual angle (horizontal / vertical)
178°/178°Response
time(ms)
6msThe minimum diameter of touch objects
6.5mmCommunication interface protocol 4PIN port pin:1234The
definition of input signal :+30VGNDClockData Product function
Elevator floor selection button functionOpen and close door
button functionCOP current floor displayElevator warning
information display, such as fire, overloading information tips, no
smoking tipsProvide two interface display styles which can be set
up in the configuration interfaceDisplay date, time, lift load on
the interfaceFloor guidance information can be setProvide two ways
to replace the display contentsInsert only U disk into the device
to automatically updateProduct function diagram Chapter
2Installation instruction Touch outline
dimensions and installation drawings RS32 board outline
dimensions and installation drawings Installation diagram
(1):The elevator panel opening and screw holes (4):On the back of
the panel,use screws to lock the display Embedded
installation steps (2):The display is directly inserted into the
panel from the front face of the panel (3):Fully embedded, bottom
fit Chapter 3The working conditions and environmental
requirements 1. The connection and disconnection of any
cable must be carried out under power failure. 2. The
connection of the cable must be firm and anti-seismic.
3. Try to keep the LCD away from the strong electromagnetic
environment(except 220VAC). 4. Keep the working
environment of the LCD dry, ventilated and without strong magnetic
radiation. 5. The stabilized voltage supply input
remains constant(AC220V). 6. The maintenance system
needs to connect to the network(Choose one of LAN,WIFI,4G).
7. The rated working voltage of LCD and RS32
communication board shall be within the range of DC24V to DC40V;
8. When connecting the power supply plug, please pay
attention to the direction of the socket and do not install anti.
9. During the installation process of RS32 board, it
should avoid falling, collision to prevent damage to components;
10. When installing the RS32 board, be careful not to
cause serious deformation of the circuit board to prevent damage to
the components. 11. The RS32 board must be protected
against static electricity when it is installed; 12.
In normal use, it should avoid short circuit caused by the
collision from metal shell and other conductive objects and even
can burn the circuit; /* March 10, 2023
17:59:20 */!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about 21.5′′ Touch Passenger Elevator Display for Otis
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup