Fixed Code Receiver, RF Module with Decoder (YCR200-L/M)

Basic Info.Model NO.YCR200-L/MApplicationIndustrialFixed Code ReceiverDecode IC: 2272L4, 2272m4TrademarkNILOriginChinaProduct Description Youngcheer RF Module with decoder, RF Modulator, RF Receiver Module(Fixed Code Receiver -YCR200-L/M)The RF Receiver module, receiver module is widely used for data receiving and signal control and are speified as preferred components in remote control garage, roller curtain, door locks, alarm system, industrial control. It adopt fixed code and it is an economical module. It is widely used to match with fixed code transmitter or remote control with PT2262, HS2260, 2264 encode IC.Model Number: YCR200-L/MYCR200-L YCR200-MRF module Spec.:Operating voltage: 5V+/-0.5VOperating current: 6mARF sensitivity: -95dBOutput level: Lo: 0.3V, Hi: 5VOperating frequency: 315MHz, 433MHzDecode IC: 2272L4, 2272M4Modulation Mode: ASKOperating temp.: -40-+55CDimension: 36mm*23mm*7mm (LWH)Decoder IC: 2272L4, 2272M4With 8 pin: GND, VCC+5V, Data output D3, D2, D1, D0, VTYCR200-M:Signal stack: Press and hold the button marked "1" of the remote control, the #1 channel will output high level +5V, when your finger is loosen, the #1 channel will change to output low level 0V. Same for other 3 channels.YCR200-L:Signal interlock: Press the button marked " 1" of the remote control, the #1 channel of receive will output high level +5V and kept, but the other 3 channels will all be low lever 0V. When you press the button marked 2, the #2 channel will output high level +5V and kept, but the other 3 channels will all be low lever 0V.We also has following mode:RF module with decoderDigital & Intelligent ReceiverRolling code receiverSuper heterodyne receiver moduleWelcome OEM/ODM RF moduel, RF receiver module.