100 Litres Steel Pressure Tank Heating Expansion Vessel with 5 Year Warranty

100 Litres Steel Pressure Tank Heating Expansion Vessel with 5 Year Warranty  SERIES INTRODUCTIONWater-DEZHl: with a replaceable membrane.This line is ideal for every modern installation and can be applied to.any type of pump. The real volume of the pressure tank is greater than common tank. A compressoris not necessarysince an air cushion, separated from the water by the membrane, maintains a constant pressure in the tank.These tanks can also be provided with stainless steel flanges. These tanks for water booster system ,pumps, potable water storage.  Basic Introduction The pressure vessel is designed to provide a storage facility and pressure reservoir for water at temperatures up to 99ºC. Common uses are in water booster sets, heating pressurisation and fill sets. The vessel incorporates a replaceable Butyl diaphragm mounted in a mild steel shell. This method of construction eliminates any contact between the stored water and the steel shell of the vessel, and is therefore suitable for use with potable water. All units up to and including 25 litre sizes are suitable for a working pressure of 8 bar, larger vessels 10 bar, (except 1000LV)For Water-Dezhi Series Interchangeable membrane pressure tanks. Membranes suitable for drinking water and can be installed to any type of pump.WRc approved and built to 97/23/EC Technical Parameter  ModelTank VolumeMaxi Working PressureDiameterHeightConnectorPackage(Paper Box)ExportPacking SizexLiterBarmmmmInchcmNon-fumigation wooden case/Or Pallet TY-04-5L510160300117x17x31TY-04-8L810200340120x20x34TY-04-12L1210270350127x27x35TY-04-19L1910270410127x27x41TY-04-24L2410270460127x27x46 TY-06-36L3610350560135x35x56TY-06-50L5010350830135x35x83TY-06-60L6010450750145x45x75TY-06-80L8010450890145x45x89TY-06-100L10010450940145x45x94TY-06-150L150104501100145x45x110TY-07-180L180105601000156x56x100TY-07-200L20010650970165x65x97TY-07-300L300107201260172x72x126TY-07-500L500107501500175x75x150TY-07-750L750107501800175x75x180TY-07-1000L100010100018001100x100x180TY-07-1500L150010110020001110x110x200TY-07-2000LPlease refer to customized Model Or Contact Mr.Charles (Export Models Only)TY-08-8L810240330125x25x34TY-08-12L1210270340129.5x29.5x35TY-08-19L1910410290129.5x29.5x41TY-08-24L2410460290129.5x29.5x46TY-08-36L3610380490138x38x50TY-08-50L5010380560138x38x57TY-08-60L6010480490148x48x50TY-08-80L8010480630148x48x64TY-08-100L10010480720148x48x73TY-08-150LPlease refer to customized Model Or Contact Mr.Charles (Export Models Only)TY-08-200LTY-08-250LTY-08-300LTY-08-400LTY-08-500LTY-08-600LTY-08-750LTY-08-1000LTY-08-1500LRegarding Installtion The vessel is supplied pre-charged with air, but this pressure may require adjustment to suit the site conditions. This adjustment must be made with the vessel isolated from the system, and before filling with water. Air may be vented from, or pumped into, a patent valve which will be found under a black plastic screw-off cover on the shell (sizes up to and including 500 litre) or on a side mounted flange (750 and larger). It will be noted that vessels of 60 litre capacity or larger are manufactured with connections at either end of the vessel shell. The vessel should be mounted so that the system connection is made at the lowest possible point, to facilitate on-site maintenance. The other connection may be fitted either with a air bleed valve, or alternatively with a blanking plug. All pressure vessels should be installed with an isolating valve and drain cock.Periodic MaintenanceThe only maintenance required on this equipment is a periodic check on the air cushion pressure. It is necessary to isolate the vessel from the system, and to drain all water from the tank before making this measurement with a standard tyre pressure gauge from the  valve.Maintaince free models are also available,Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)How a Expansion Tank Works    Taizhou Tianyang Electrical co.,LTD. Is located in Shangma industrial Zone,Shitang Town,Wenling City,Zhejiang Province,covering an area of 15,000 square meters.Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company.We have produced pressure tank for more than 20 years.Available volumes range from 0.5 to 1500 liters.and working pressure from 4 bar to 25bar. Our products are applied to pump systems .Our products are exported to numerous overseas clients.We can custom design and manufacture products according to client-supplied requirements.    We adhere to the business philosphy"Credibility,Quality and service",our scientific management is based on the domestic market, but facing to the world.Warmly welcome customers both domestic and from abroad.We sincerely hope to cooperate and develop together to create a better future.    Taizhou Tianyang Electrical Co.,Ltd. Is always your most loyal partner.  1.Q: What is your MOQ of this item?         A: We are a factory, have stock. 1PCS is ok!   2.Q: