Teikoku Canned Pump Canned Motor Pump of ISO2858 Series

Basic Info.Model NO.leCertificationISO9001:2008, ISO9001:2000FeatureCorrosion Resistant, Antimagnetic, Low Temperature, High Temperature, High SpeedStyleWithout Outer RingRows NumberMultipleLoad DirectionRadial BearingMaterialStainless SteelWeight0.03kg-4kgPrecision RatingP5ApplicationTextile IndustryCertificateISO9001:2015OEMAcceptTrademarkBDRTransport PackageWooden PackSpecification64.1MMOriginChinaHS Code8482103000Product DescriptionSupply AbilitySupply Ability2000 Piece/Pieces per MonthCanned Motor Pump of ISO2858 SeriesCapacity:Max. 200 m³/hHead:Max. 125mOutput:Max. 120kWApplication:The interface sizes, installation sizes and performance parameters conform to BS-EN22858 and ISO2858 Standard. They are used for petroleum and chemical field of European design standard as well as domestic substitutesBarrel Canned Motor Pump with High Cavitation PerformanceCapacity:Max. 600m³/hHead:Max. 800mOutput:Max. 260kWApplication:Petrochemical fieldSlurry sealed type (DA type)Capacity:Max. 1000m³/hHead:Max.200mOutput:Max.220kWApplication:applicable for transporting the liquid mixing with few soft solid particle or flocConcentration:slurry concentration 3wt%Fundamental type (F type)Capacity:Max. 1000m³/hHead:Max. 200mOutput:Max.500kWApplication:organic & inorganic chemical, vacuum series, high pressure series, other nuclear used radioactive liquid and so onReverse circulation type(R type)Capacity:Max. 1000 m³/hHead:Max.200mOutput:Max. 500kWApplication: low boiling point liquid including Freon, liquefied ammonia, liquefied carbon dioxide and so onHigh temperature insulation type (B type)Capacity:Max. 1000m³/hHead:Max.200mOutput:Max. 500kWApplication: hot oil, hot water and other high temperature liquidTemperature:Max. 450ºCpriming type (G type)Capacity:Max. 100m³/hHead:Max 100mOutput:Max. 45kWApplication:non- easily vaporized liquid including organic & inorganic chemical and so onExcellent FeaturesNo leakageSuitable for handling flammable, explosive, toxic, corrosive and expensive fluids hermetically.AirtightSuitable for handling vacuum tight system, fluids that react when contact with air.No Shaft SealSuitable for handling high pressure system, high or lower temperature fluids, high melting point fluids.No External LubricationSelf-lubrication design, no lubrication required for motor bearings and no lubrication levels to check or maintain.Compact designSmall, compact and self contained, installation costs are reduced with minimal foundation requirements.Low Noise & VibrationTotally enclosed with neither motor fans nor exposed bearings.Packaging & deliveryPackaging DetailsCarton packingPortqingdao port,dalian port tianjin portPicture Example: Lead time: Quantity(pieces)1 - 100>100Lead time (days)30To be negotiatedBasic Info.Model NO.W3ZZTransport PackageIndustrial PackageSpecification7*19*6OriginChinaHS Code8482103000Production Capacity1000000PCS/YearProducts Introduction:Product nameIron carbon steel chrome steel 608zz deep groove ball bearing with low priceModel number608 BearingBore size8mmOutside size22mmBearing materialIron, carbon steel bearingMOQ100 PCSPrice termsEXW, FOB, CIFPayment termsT/T, L/C, Paypal, Credit cardProduction timeDepends on the quantity, normally 35-45 days.PackagePE bag+white box+outer carton+pallet, or as customers' requirement.ApplicationUsed in door, window, furniture and sports equipment.Features  :Carbon steel bearings are characterized by low price, the use of bearing requirements are not too high.  Hardness, wear resistance, life and so on are worse than conventional bearing steel bearings.  Carbon steel bearing performance description:  First, carbon steel bearings in terms of service life.  Their service life is very different, the service life of bearing steel is long, many garbage bearings are carbon steel bearings, mainly hardness and wear resistance are not as good as bearing steel bearings.  Second, in wear resistance.  Low carbon steel only in the surface carburizing surface quenching, and not all quenched.  Many low-grade carbon steel bearings on the market are not hardened at all, and their wear resistance is very poor.  Third, in the process and use effect.  Bearing use effect is related to the use of the environment, not to say that carbon steel bearings are not good, it depends on which machinery to use, because some do not need high-grade, with carbon steel bearings is appropriate.  Of course, Luo Steel is better but the cost is much higher. The standard bearing steel is Gcr15.  Fourth, in bearing materials and performance.  For example, the bearing ring and the rolling body should repeatedly withstand high contact pressure, and carry out rolling contact with sliding, while maintaining high precision rotation.  Therefore, whether the material and performance of bearing ring, rolling body and cage meet the following requirements: high elastic limit;  High rolling fatigue strength;  To have a high hardness;  Good wear resistance;  Good toughness against impact load;  Good di