Spin Flash Drying Equipment for powdery materials

Spin Flash Drying EquipmentSpecifications   Spin Flash Drying Equipment:  1)5-10s drying time  2)heat source:steam exchange, fuel gas,oil or coal,etc.  3)negative operation    Spin Flash Drying Equipment: Drying sticky materials  The cone structure in the dryer, washing out of the air flow to the wall and the structure of the agitator determines it can deal with certain sticky materials.  Drying thermo-sensitive materials  As the drying time is short, the relative speed between the materials and the hot air is big, and the hottest air does not contact the dried materials directly, it is suitable to treat the thermo-sensitive materials.  The drying intensity is high.  As the materials are smashed, washed out and impacted, its surface area increases and the drying is strengthened; At the same time, as the hottest air does not contact the dried material directly, the entering air temperature can be made higher than the melting point of the materials, therefore, the drying intensity of the equipment is high Efficiently control the final moisture and fineness  The final moisture and the fineness of the finished product is effectively controlled by the internal devices equipped in the drying tower (swirl-flow flake, elutriate ring or grader) , and the coordination with the temperatures of the entering and discharging air.  Environment meets the standards. The system eliminates the operation environment pollution under the negative pressure in the operation and it adopts different dust removing mode and materials according to the different raw materials (pulse bag dust catcher, water shower duster, Venturi damp dust remover and so on).  Low labor intensity  The feeder and the discharger are made in different forms according to the difference of the materials so as to reach automatically continuously feeding and discharging aims.  The best power matching  The blower, the draught fan, the agitator and the feeder and so on are furnished with the best power according to the different nature of the materials (density, bulk density, viscosity, fineness, primary moisture, final moisture, angle of repose and so on). Technical parameters TypeInner diam. ofthe main machine(mm)Air quantitym3/hMoisture evaporation kg/hInstalled capacitykwMax. height mFloor area m2XSG-2200350-50012-176-103.510XSG-44001150-200040-7012-184.218XSG-66002450-450080-15020-255.225XSG-88004500-7550150-25027-325.632XSG-1010007000-12500230-42040-476.238XSG-12120010000-18000300-60050-657.045XSG-14140013500-23500450-75060-727.455XSG-16160018000-32000600-120070-908.075Notice 1.)Moisture evaporation volume is the maximum moisture evaporation volume measured when the entering air temperature is 180 and discharging air temperature is 80; 2.)The max height and floor coverage will be laid according to the actual conditions, the data in the table is only for reference.   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1