High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering Pump

Summarize of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpInstallation of water flow Channel: in terms of recommended sample installation diagramThe form of water exit: flap valve or other waysInstallation ways: Floor fixed type, suspended type, floated type and diagnal installed type;Max. Capacity: 90000m3/h Max. Head: 20m Motor of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpSubmersible motorPower Level: electrical performance conforms to GB756Protection level: IP68Voltage grade: ≤1300kw, voltage, 380v, 660v, 6000v, 10000VInsulation level: FRated frequency: 50Hz/60Hz  Shaft seal of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpThere are two or three stages of mechanical seal. The first stage called carborundum (directly contact with water). The second and third stage called graphite and carborundum.Leak proof Equipment of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpSinoflo Axial/Mixed Flow Pump have been equipped with leak proof sensors. When the oil tank, the inner part of motor or the junction box has been leaked by water, the sensor will signal or made the motor shut down, and retain the malfunction signal.Over heating protection system of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpA overheating protection device is fastened on the motor winding. When the temperature exceeds the stated value, the device will signal or made the motor shut down.Rotation direction:Seen from the top of the motor, the impeller is rotating clock wisely.Application of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpSinoflo axial/mixed flow pump is widely used in industry and agriculture water lifting, urban water supply, light polluted water discharge and other water transfer project.Working condition of High Flow Low Pressure Industrial Submersible Trash Pool/Pond Dewatering PumpClean water with the temperature no more than 50 or some liquids that are similar to water.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1