Basic Info.Model NO.AHP06-2S-30After-sales ServiceFree Online
SupportWarranty1 YearMax.Capacity50-100 L/minPressure MediumOil,
Water and Other LiquidTypeHandheldCertificationCE, ISO,
AtexPowerPneumaticPump TypeDouble Drive Single ActingDriven
PowerCompressed AirModel No.Ahp06-2s-30Max. Pressure330 BarMax.
Flow13.3 L/MinInlet Ports1′′ FnptOutlet Ports1/2′′ FnptActual
Ratio35:1CertificateISO9001:2015, CE, AtexMediumHydraulic Fluids,
Water, Solvents, Mild ChemicalsApplicationfor Charging Cylinder,
Pressure Test, etcTrademarkHYDR-STARTransport PackageFoam Inside,
Carton Box /Wooden Box OutsideSpecification316 stainless
steelOriginChinaHS Code8413501090Product Description Product
ParametersHYDR-STAR AHP06-2S-30 200-800 Bar High Pressure Pneumatic
Driven Hydro Static Test PumpItemValueModel NO.AHP06-2S-30Max.
Pressure330 BARMax. Flow13.3 l/minMediumhydraulic fluids,
water,solvents, mild chemicals,liquefied gasesApplicationPressure
testing, Jacking and Lifting, Valve actuator control,
Hydraulic cylinder actuation, Roller tensioning,
Precision lubrication and spraying, Work holding and power
clamping, Liquefied gas transfer, Machine tools,
Well Control PanelWarranty1 yearProduct DescriptionPneumatic driven
liquid pumpPneumatic driven liquid pumps operate on the principle
of differential working areas. An air piston drives a smaller
diameter plunger or piston to provide a pressure ratio.The pressure
ratio is the method of determining maximum outlet pressure
available. HYDR-STAR model numbers reflect the nominal pressure
ratio of the pumps. HYDR-STAR liquid pumps will cycle
automatically when compressed air is first applied to the drive. It
will start cycling at its maximum speed thus producing maximum
fluid flow. At this stage, the pump is acting as a transfer pump,
filling the pressure system with fluid. As resistance increases in
the system (creating back pressure to the pump), the pump will
decrease its reciprocating action. Back pressure in the system
finally balances with the incoming air drive pressure times the
ratio. At this point, the pump will stall and maintain pressure
without consuming any energy. If there is further demand on the
system for flow, the pump will automatically start cycling
again.The series and its functionsHYDR-STAR pumps offer the right
solution for every application. They are suitable for different or
stepped flow rates as well as for different maximum allowable
operating pressures.HYDR-STAR pumps with two or three air drive
sections reach the same final pressure as a HYDR-STAR pump with one
air drive section with 1/2 or 1/3 of the air drive. Double-acting
pumps increase the pump capacity by around 50% in comparison to
single-acting pumps and reduce the pulsation equally.Product
Features☆ Up to 100,000 psi (7000 bar) capability. ☆
Infinitely variable cycling speed.☆Stall feature at pre-determined
pressure to hold that pressure without consuming power
.☆Easily automated, with many modification and control options
available.☆ Suitable for most liquids and liquefied gases.☆ Can be
manufactured to meet CE, ATEX and NACE.☆Robust, reliable, compact
and easy to maintain proven design.☆ Unbalanced cycling spool
provides immediate response to pressure changes.☆Also available in
standard, Configuration required by customer.☆No need for air-line
lubrication, which saves costs and prevents
contamination. Product Application☆ Pressure
testing☆ Jacking and Lifting☆ Valve actuator
control☆ Hydraulic cylinder actuation☆ Roller
tensioning☆ Precision lubrication and spraying☆ Work
holding and power clamping☆ Liquefied gas
transfer☆ Machine tools☆ Well Control PanelOur
AdvantagesEasy handling 1. Initial operationThe pump is
prepared for operation manually:☆ Connect supply lines
(compressed air, suction and pressure lines).☆ Set air drive
pressure.☆ Open compressed air supply slowly so that the
high-pressure pump starts up .2. Build up pressureThe pump
technology executes all the steps for pressure build-up
automatically: ☆ Automatic cycling of 4/2-way valve (spool
cycling valve) by means of air pulses from the pilot valve (2/2-way
valve)☆ Suction of medium.☆ Optimum cycling conditions
thanks to large cross-sections .3. Achieve and hold pressureThe
pump controls the processes of reaching and holding
pressure.☆ Pump automatically stops operating when the
operating pressure is reached due to equilibrium of
forces☆ Pressure is held.☆ Pressure holding phase with no
energy consumption or heat generation .☆ Pump restarted
automatically if operating pressure drops. Company
ProfileFormed by the technical team with at least 15-year
experience in high-pressure technology and fluid control, HYDR-STAR
Fluid Control Company Limited has long been regarded as the leading
manufacturer in China for pneumatic driven liquid pumps&gas
boosters and high pressure(up to 100,000psi) valves. With the
growing acceptance from foreign customers on its pumps and valves
application experience, HYDR-STAR is accumulating the
Related products about Hydr-Star Ahp06-2s-30 200-800 Bar High Pressure Pneumatic Driven Hydro Static Test Pump
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup