Renewable Energy Combined Heat and Power CHP System

Renewable energy combined heat and power chp system  This series CHP Power Generator Set choose high quality gas engine assembled with alternators (Stamford, Fraday or other famous brand), the control system adopts PLC automatic controller. This series of gas generator can be used in biogas power plant, natural gas power plant, school, hospital, oil field, pig farm, cattle farm, chicken farm, sewage treatment plant, biogas project, as 24-hour uninterrupted power or standby power.Specification / Data:Cogeneration UnitModel HTG-10/1000GFRated Power 10kW-1000kWStandby Power 11kW-1100kWThermal Efficiency ≥80%Rated Voltage 400V/230VRated Frequency 50Hz/60HzType Open/Silent/Soundproof/ContainerDiesel EngineEngine Brand Cummins, Deutz, WEICHAI, Ricardo, Steyr, JichaiAlternatorType BrushlessBrand Stamford, Faraday, Marathon, Evotec, etc.Connection 3-pahse, 4-wireControllerType Auto PLC ControllerBrand Deepsea, SmartGen, ComAp, HT2012 etc.Fuel Biogas/Natural Gas/LPG/Biomass GasApplication Biogas Power Plant, Pig Farm, Cattle Farm, Chicken Farm, Sewage Treatment Plant, Biogas Project etc.Delivery By Sea, By Air, By Train.Warranty 12 months or 1500 running hours (subject to the earlier)  Requirments for natural gas1.Methane should be at least 50%2.The natural gas temperature should be between 0-60 ºC3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.5. Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary.6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S