Low Pressure Drop/Air Compressor/Pipeline/Industrial/Compressed Air Filter

YF series Air Filter is recommended for the industries in automation, cosmetics, blow molding, spraying etc.7 Grades Filter Element:  PF/AO/AA/AX/ACS/AR/AARPFAOAAAXACSARAARAs a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligibleHigh efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w).High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w)Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w)Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w)Dust particles whose diameter more than 1μm can be removedDust particles whose diameter more than 0.01μm can be removed  Feature1. Aluminum Alloy material, 15 years serve life for filter housing under working condition from temperature 1.5ºC~80ºC.Maxi. Pressure is 1.0Mpa.2. 6000~8000 hours serve life for filter element,filtering performance up to 99%3. Integrated die-casting filter up to 4 inch, flow rate up to 48m³/min.4. Top cap of filter element with diversion fins, which will let the air come inside the filter more smooth, less pressure loss.Technical SpecificationThe flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).For application in other working pressure, please refer to the correction factors.ModelPipe sizeFlow ratesDimension (mm)L/Sm3/minscfmW(Width)D(Depth)H(Height)ABC(clearance for housing)YF010RC1/2"16.7 1.0 35.3 967926129198118YF020RC3/4"25.0 1.5 53.0 967926129198118YF030RC3/4"30.0 1.8 63.6 967929529233153YF040RC1"33.3 2.0 71.0 967929529233153YF060RC1"60.0 3.6 127.0 13811140337296208YF070RC1"83.3 5.0 177.0 13811150337396303YF080RC1-1/2"125.0 7.5 265.0 13811150337396303YF090RC2"166.7 10.0 353.1 17414273658607469YF100RC2-1/2"216.7 13.0 459.0 17414273658607469YF110RC2"283.3 17.0 600.0 174142101658887794YF120RC2-1/2"316.7 19.0 671.0 174142101658887794YF130RC3"416.7 25.0 883.0 22018479374649514YF140RC4"466.7 28.0 989.0 22018479374649514YF150RC3"683.3 41.0 1448.0 220184105074906764YF160RC4"800.0 48.0 1695.0 220184105074906764Technical requirementsMaximum operating pressure: 10 barg   Operating temperature: 1.5°C~80°C.PressureBarg12345678910111213141516Psig152944597387100116131145160174189203219232Correction factor0.380.530.650.760.850.931.001.071.131.191.231.311.361.411.461.51    Replacements and spare partsSuccessful Case                                                                             Coalescing FiltersCoalescing Filters are probably the most important items of purification requirements in a compressed air system,which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level assmall as 0.01micron in size. Usually, in the installation system, the first filter's purpose is to pre-filter, protect the highefficiency filters from bulk contamination so as to provide high quality compressed air. If the air filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filterelement and the air low would force the liquid to get through from the pores of the element media. thus increaseworking pressure drop and reduce filtration performance.Activated Carbon FiltersOil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must providelarge activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activatedcarbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. it's not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.YUKA DeliveryYUKA servicea. Providing professional consultation, technical support and special solutionsb. Providing timely feedback on complaintsc. Providing perfect after sales service and warrantyQ:Why choose us?a. 24 years' practical experiences in R&D and manufacturing Compressed air treatment;b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;c. ISO 9001:2015, CE and product follow ISO8573-1;d. With Germany Imported high efficiency filtration Test Instrument;e.All goods had been 100% test before dispatched.  Frequently Asked QuestionsQ1. What kind of your company is it?We're the manufacturer integrated with R&D, production and sales. Q2. How about your technical conditions and production capability?Complete process