Sullair Replacement 250034-116 Screw Air Compressor Part Oil Separator

Sullair Replacement 250034-116 Screw Air Compressor Part Oil SeparatorProduct DescriptionCommon causes of screw air compressor oil clogging failure:1. The surrounding environment of the screw air compressor. There are corrosive gases in the surrounding environment of the screw air compressor. For example, in some occasions, sulfide, thinner, cleaning chemicals, etc. will volatilize in the air. The high temperature of the machine itself will accelerate the oxidation of the oil. Once these gases Entering the screw air compressor system, there is a chemical reaction with the engine oil, resulting in carbon deposits and sludge, etc. Some of the impurities enter the oil circulation system and are intercepted by the oil filter, and the other part of the impurities rises to the oil with the oil-gas mixture. When the gas passes through the oil, these Impurities stay on the oil filter paper, block the filter holes, and increase the resistance of the oil, so that the oil needs to be replaced in a short period of time. 2. Qualified air filter, oil filter, and engine oil are not used, one or more of them exist. The air filter with poor filtration accuracy will prevent some dust particles in the air from being intercepted, and will directly enter the screw air compressor system, and the oil filter and oil component load will be too large, resulting in blockage; impurities and oil oxides entering the screw air compressor system , worn metal particles, etc. Due to the poor filtration accuracy of the oil filter, a part of the intercepted oil filter filter layer, another part of the impurities has been continuously in the machine until it rises to the oil, and stays in the filter layer of the oil after separation, causing the oil to be removed prematurely. Blockage: engine oil with poor oxidation resistance should not be used, even if the working time is short, it will produce carbon deposits and jelly, which will block the oil. 3. There is leakage on the pipeline between the air filter and the air inlet of the main engine. The common causes of leakage are: the air filter is not installed properly; the contact area of the air filter assembly is uneven; the contact surface between the air filter and the assembly has dirt attached to it, resulting in leakage; ; Air filter or air filter assembly rupture, etc. 4. Excessive moisture in the oil filter material will cause the filter material to swell and shrink, reducing the effective separation area of the oil, resulting in an increase in the resistance of the oil and premature blockage of the oil   Air Compressor ModelsPart No.Air Compressor ModelsPart No.ES 112250106-706LS 20 S E 175/200HP250034-134ES 11 Sullube2250106-706LS 20 S LEAK FREE250034-085ES 6250028-033LS 20 S LEAK FREE2250048-734ES 6 Sullube250028-033LS 20 S Sullube2250048-734ES 82250106-791LS 20 SRF 100 HP2250061-137ES 8 Sullube2250106-791LS 20 SRF 100 HP2250061-138LS 10 25/30 HP250034-112LS 20 Sullube2250061-138LS 10 402250121-500TS 20 100HP250034-122LS 10 LEAK2250121-500TS 20 100HP250034-134LS 12250034-116TS 20 125/150HP250034-122LS 12250042-862TS 20 125/150HP250034-134LS 12 LEAK2250100-755TS 20 200HP250034-122LS 12 LEAK2250100-756TS 20 200HP250034-134LS 16-75 ACAC250034-116TS 20 250HP250034-122LS 16-75 ACAC408167-011TS 20 250HP250034-134LS 16 100 HP250034-116TS 32 200/250HP250034-122LS 16 100 HP250042-862TS 32 200/250/300HP up to June,2002250034-12410B - 25 ACAC250034-112BDS 116856185716B8 - 75 WCAC250034-116LS 16 SRF 100HP250034-11616B8 - 75 WCAC408167-011LS 16 SRF 100HP250042-862BDS 1568561857LS 16 SRF 60/75HP250034-116BDS 18,5  from 03/20032250121-500LS 16 SRF 60/75HP250042-862BDS 18,5  up  to 2003250034-114LS 16 SRF LEAK FREE 100HP2250100-755BDS 22 from  03/20032250121-500LS 16 SRF LEAK FREE 100HP2250100-756BDS 22 up  to 2003250034-114LS 16 SRF LEAK FREE 60/75HP2250100-755BDS 30 from  03/20032250121-500LS 16 SRF LEAK FREE 60/75HP2250100-756BDS 30 up  to 2003250034-114LS 20 100HP2250061-137BDS 37250034-116LS 20 100HP2250042-862BDS 37250042-862LS 20 24KT 100HP2250061-137BDS 45250034-116LS 20 24KT 100HP2250061-138BDS 45250042-862LS 20 E 125/150HP250034-085BDS 55250034-116LS 20 E 125/150HP2250048-734BDS 55250042-862LS 20 S 125/150HP250034-085BDS 75250034-116LS 20 S 125/150HP2250048-734BDS 75250042-862LS 20 S E 175/200HP250034-122Maintenance of the oil separatorThe oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life,have a huge impact. It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered. The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa. Otherwise, the motor will be overloaded, the oil se