Motorcycle Auto Parts Wheel Bearings 5303 5304 5305-2RS/Zz Motor Parts Bearing Steel Double Row Angular Contact Ball Bearing

Angular contact ball bearing Model:3000-2RS  3001-2RS 3002-2RS  3003-2RS  3004-2RS  3005-2RS  3006-2RS 3007-2RS  3008-2RS 3009-2RS  3010-2RS  3011-2RS  3012-2RS 3013-2RS 3014-2RS  3015-2RS 3016-2RS  3017-2RS  3018-2RS  3019-2RS  3020-2RS 3800-2RS  3801-2RS 3802-2RS  3803-2RS  3804-2RS  3805-2RS 3806-2RS 3807-2RS  3808-2RS 3809-2RS  3810-2RS  3811-2RS  3812-2RS  3813-2RS 3814-2RS  3815-2RS 3816-2RS  3817-2RS  3818-2RS  3819-2RS  3820-2RS 3900-2RS  3901-2RS 3902-2RS  3903-2RS  3904-2RS  3905-2RS  3906-2RS 3907-2RS  3908-2RS 3909-2RS 3910-2RS  3911-2RS 3912-2RS  3913-2RS 3914-2RS  3915-2RS 3916-2RS  3917-2RS  3918-2RS  3919-2RS  3920-2RS 4200-2RS  4201-2RS 4202-2RS  4203-2RS 4204-2RS  4205-2RS  4206-2RS 4207-2RS  4208-2RS 4209-2RS  4210-2RS  4211-2RS  4212-2RS  4213-2RS 4214-2RS  4215-2RS 5200-2RS  5201-2RS 5202-2RS  5203-2RS  5204-2RS 5205-2RS  5206-2RS 5207-2RS  5208-2RS  5209-2RS  5210-2RS  5211-2RS 5212-2RS  5213-2RS 5214-2RS  5215-2RS  5216-2RS  5217-2RS  5218-2RS 5219-2RS  5220-2RS 5300-2RS  5301-2RS  5302-2RS  5302-ZZ  5303-2RS 5303-ZZ  5304-2RS  5304-ZZ   5305-2RS  5305-ZZ   5306-2RS  5306-ZZ 5307-2RS 5307-ZZ  5308-2RS  5308-ZZ  5309-2RS  5309-ZZ  5310-2RS 5310-ZZ  5311-2RS   5311-ZZ   5312-2RS  5312-ZZ  5313-2RS 5313-ZZ 5314-2RS 5314-ZZ  5315-2RS  5315-ZZAngular contact ball bearings can bear radial load and axial load at the same time, can work at a higher speed, the greater the contact Angle, the higher the axial carrying capacity.The contact Angle is the Angle between the contact point line of the ball and raceway in the radial plane and the vertical line of the bearing axis. The contact Angle of high-precision and high-speed bearings is usually 15 degrees, and the contact Angle will increase under the action of axial force.Parameter:Product NameAngular contact ball bearingBrand Name KSAMaterialGcr15Precision GradeP0,P6,P5CertificationISO 9001PackeageBox /Carton/Wooden Box/Plastic Tube or Per buyers requirementMOQDepending On MoedlSericeOEMSampleAvailablePaymentTT or L/C or Western UnionPortQingdaoThe inner and outer raceways of angular contact ball bearings are relative offset to each other in the direction of bearing axis. This means that such bearings are designed to carry combined loads, that is, radial loads plus axial loads.The axial bearing capacity of angular contact ball bearing increases with the increase of contact Angle. In the radial plane, the connection between the steel ball and the raceway contact point (that is, the direction in which the combined load is transferred from one raceway to another raceway) is the Angle of the vertical line of the bearing axis.Product DescriptionSingle row angular contact ball bearing Single-row angular contact ball bearings can only bear the axial load in one direction, this type of bearing usually needs to be adjusted relative to another bearing, their bearing rings have high and low two shoulders, and are not separable.  Bearing characteristics: High carrying capacity The smaller shoulder allows a larger number of steel balls to be loaded, thereby increasing the load carrying capacity of the bearing. Good operating performance It can accelerate and decelerate quickly The installation of universal bearings is extremely simple No adjustment or pretightening is required to obtain the correct internal clearance.Double row angular contact ball bearing The double row angular contact ball bearings are designed to correspond to two single row angular contact ball bearings arranged back to back  Bearing characteristics: Occupy less axial space It can be used in applications where the axial space is limited when two single-row angular contact ball bearings are arranged back-to-back. It can withstand radial loads and axial loads in both directions Can withstand overturning moment Rigid bearing arrangementFour point contact ball bearing Four-point contact ball bearings are radial single-row angular contact ball bearings whose raceways are designed to support axial loads acting in both directions, and can also support a limited radial load (load ratio) for a given axial load. The bearing is separable in design, that is, the outer ring with the ball and cage assembly can be mounted separately from the two inner half rings.  Bearing characteristics: It can withstand axial loads in both directions The required axial space is small Compared with double-row bearings, this kind of bearing occupies significantly less axial air. High carrying capacity A greater number of steel balls can be packed into the bearing, thus achieving a higher load carrying capacity. Separate type design The separate inner ring makes it easier to install and remove bearings. Improve the flow of lubricating oil When subjected to high clamping force, the deformation of the inner ring is limitedDetailed PhotosCompany Profile                Shandong Kangshi Precision Bearing Manufacturing Co., Ltd., located in Yandian Town Industrial Park, Linqing City, Shandong Province, mainly produces zero de