High Pressure Reciprocating Natural Gas Compressor Used for Pressurized and Delivery

Product DescriptionPiston compressor is a kind of piston reciprocating motion to make gas pressurization and gas delivery compressor mainly consists of working chamber, transmission parts, body and auxiliary parts. The working chamber is directly used to compress the gas, the piston is driven by the piston rod in the cylinder for reciprocating motion, the volume of the working chamber on both sides of the piston changes in turn, the volume decreases on one side of the gas due to the pressure increase through the valve discharge, the volume increases on one side due to the reduction of air pressure through the valve to absorb the gas.We have various of gas compressor, such as Hydrogen compressor, Nitrogen compressor, Natrual gas compressor, Biogas compressor, Ammonia compressor, LPG compressor, CNG compressor, Mix gas compressor and so on.Advantages of Gas Compressor:1.   High efficiency, strong reliability and high degree of automation;2.  Fewer wearing parts, small vibration, low noise, convenient operation and maintenance;3.  Easy to install on site and connect with the user's pipeline system to operate4.  Alarm automatic shutdown to protection machine function5.  The compressor main engine and auxiliary equipment are all installed on the skid frame, and the operation is stable and reliable. The overall skid installation is convenient for the transportation and installation of the compressor.6.  The whole machine parts are carefully designed.Lubrication includes : Oil lubrication and oil free lubrication;Cooling method includes: Water cooling and air cooling.Installation type includes: Stationary,Mobile and Skid Mounting.Type includes: V-type, W-type,D-type,Z-typeDescriptionNatural gas compressorAs an important modern energy source, natural gas is widely used in various fields. For different gas sources, the application methods adopted arealso different.Casing Gas Recovery CompressorCasing gas refers to the natural gas in the casing when the oil production well is producing oil. If its pressure is high, it will affect the oil production. Originally, it was directly vented. One is to pollute the environment, and the other is to waste energy. Now the use of compressor booster recovery is not only beneficial to oil production and environmental protection, but also a good measure to maximize economic benefits. The main components of its gas are methane, ethane, carbon three, carbon four and other gases, and hydrogen sulfide and water are mixed in it, and the components are relatively mixed. Before entering the compressor, it generally needs to be purified to remove the acrobatics and liquid free water. And then according to the different needs of users to increase to different pressure levels.1. For direct recovery through the oil pipeline, the pressure needs to be increased to about 15~20 kg, depending on the pressure of the oil pipeline.2. Press it to about 45 kg and transport it by medium pressure tanker.3. Press to 250 kg and transport by high pressure tanker.The latter two methods are suitable for use in gathering and transportation stations. Most of the single wells have a small gas volume and are relatively scattered, which is not conducive to the rapid loading and transportation of tankers.The casing gas recovery compressor is also suitable for oilfield associated gas, wellhead gas and other similar conditions.Pipeline natural gas boosterDuring the use of pipeline natural gas, due to factors such as the distance of the pipeline, pipe diameter, elbow and other factors, certain pipe losses are caused, and it is easy to cause insufficient pressure when using gas. At this time, it is necessary to use booster equipment to increase the pressure of natural gas to meet the requirements of use.AppicationIt is mainly used for pressurized transportation of natural gas entering the pipeline network. (Natural pipeline extraction, recovery of combustible gas cans) can also be used for stirring in the pharmaceutical industry, brewing industry, pressurized transportation of gas in the chemical industry, food industry Medium blow molding bottle, machine manufacturing parts dust removal, etc.Specification and main parametersMethodMediumFlow(Nm3/h)Inlet pressure(MPaG)Outlet pressure(MPaG)ZW-0.2/1-18Casing natural gas200.11.8ZW-0.4/1-18Casing natural gas400.11.8ZW-0.55/1-18Casing natural gas550.11.8ZW-1.0/1-18Casing natural gas1000.11.8ZW-0.2/3Natural gas10Normal pressure0.3ZW-0.25/0.5-2Natural gas200.050.2ZW-0.25/40-60Natural gas5204.06.0ZW-0.3/18-19Natural gas3001.81.9ZW-0.5/3Natural gas25Normal pressure0.3ZW-0.55/6-120Natural gas2000.612.0ZW-0.6/(10-16)-40Natural gas350~5301.0~1.64.0ZW-0.6/2-25Natural gas900.22.5ZW-0.65/0.12-0.5Natural gas350.0120.05ZW-0.75/5.7Natural gas40Normal pressure0.57ZW-0.8/2-210Natural gas1250.221.0ZW-0.85/0.8-3Natural gas800.080.3ZW-0.85/1-22Natural gas850.12.2ZW-1.0/(1-2)-25Natural gas100~1500.1~0.22.5ZW-1.0/5-15Natural gas3100.51.5ZW-1.2/1.5-22Natural gas1500.152.2ZW-1.2/20-24Natural gas13