Auto Multi Ultrsonic Plastic Spot Welding Machine

Multi-head Hot Plate Machine Model:BY-5TRB(FB)  Product DescriptionThis equipment has been applied to the welding of car rear coat racks and the temperature control area of the temperature module. Multiple non-standard customized welding units, modular design. Multi-head welding can be performed at the same time to improve welding efficiency. 10 sets of welding procedures can be pre-stored, and the data interface can be linked to the production line. MISUMI original heating device. Hot plate  head temperature control, with temperature self-check, closed loop control, multi-point independent temperature control, temperature control accuracy can reach ±2 degrees  Equipped with man-machine interface, Chinese and English interface operation is more intuitive.  Adopt SMC cylinder/Rongda bearing. The machine's integral square tube and sheet metal are welded to strengthen the overall rigidity and make it more stable during operation. The production cycle is 35S-45S.  Man-Machine EngineeringSafety: The equipment is equipped with a protective grating and a safety baffle for scalding safety warnings. Authority management: The device sets the administrator and operator authority. The height of the working table is 900MM The device is started by two hands.  Equipment capabilityIndiscriminate operation verification (the device is protected if it does not follow standard procedures).Quality traceabilityProduction capacity record. Alarm fault code and its record. Man-Machine Interface-The visual information of the man-machine interface includes current operation steps, alarm information and solutions. IMS interactive function: support Ethernet communication, the device has a QR code scanning and identification function, the hot plate temperature, displacement, and hot plate time data can be recorded and the data needs to be pushed to the company's IMS system. (This function is customized according to customer requirements.)  Equipment fixtureThe equipment can be independently equipped with a mold changing cart. (This item is customized according to customer requirements)Quick die changeThe fixture of the equipment adopts simple, fast and reliable fixing methods such as positioning pins, without special tools. The pneumatic part and sensor part of the fixture of the equipment are designed with quick plug-in The quick mold change time is 10-15minutes.  Electrical layout/SafetyThe equipment tool is equipped with sensor recognition, the model selected by PLC is different from the current fixture, and an alarm is required. Locking function-when the product is detecting NOK, the product is locked in this station (requires designated personnel to unlock). Equipment alarms, fault information or corresponding faults are displayed on the man-machine interface. Control system voltage DC24. I/O- Each station I/O has a 10% margin for future expansion.  Technical ParametersEquipment dimensions:(L)2100MM*(W)1200MM*(H)2500MM. Maximum mold capacity of equipment:(L)1100MM*(W)800MM*(H)650MM. Power : 3-phase 380V 50Hz, can be customized. Air source specifications:   4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA). Adaptable to ambient temperature: : -5ºC~40ºC Adaptable to ambient humidity : 20%~80% The noise of the transmission part does not exceed 70 decibels Total Power:5KW/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1