Titanium Tube Shell Heat Exchanger for Swimming Pool Tube Heat Exchanger

  Titanium Heat Exchanger for SPA Pool Heat Pump / Aquarium Chiller  The internal heat exchanger is made of pure titanium, has a good corrosion resistance effect and high heat exchanging efficiency.It is non-magnetic, non-toxic and can resist heating well. The outer barrel adopts injection molding with high strength plastics,press solvents into shape.   It has a good chemical stability and would not be influenced by environmental factors and medium composition of the pipeline.   Also it has a good corrosion resistance,low efficiency of thermal conductivity, insulation, energy-saving effect through a professional welding.  Modle Capacity(kw) Water flow (m3/h) H (mm) H1 (mm) H2 (mm) D (mm) E (mm) Water inlet &outlet (inch) HETA-1.0 3.5 1.5 400 250 60 160 195 1.5 HETA-1.5 6.5 2.2 475 325 60 160 195 1.5 HETA-2.0 8.5 3 535 385 60 160 195 1.5 HETA-2.5 10 3.5 550 400 60 160 195 1.5 HETA-3.0 12 4.5 600 450 60 160 195 1.5 HETA-4.0 15 5 640 490 60 160 195 1.5 HETA-5.0 18 7.5 650 500 70 200 235 1.5 HETA-7.5 27 11 580 430 70 200 235 1.5 HETA-10 36 15 720 610 80 250 290 2.0 HETA-12 43 20 720 610 80 250 290 2.0 HETA-15 54 25 910 800 80 250 290 2.0 Titanium has the super strong corrosion resistant ability. Our titanium heat exchanger use seamless pure titanium tube as heat conductor, can ensure the titanium heat exchanger can be used for a long time, without any cost in the after-sale services.Due to its good properties ,the titanium heat exchanger widely used in:Swimming pool equipment, Aquarium chiller, Marine refrigerant system, Solar energy heater, Aquaculture, Pharmacy, Food industry,Electroplating industry and some heat recovery from the waste water or exhaust gas. Titanium sprial tube industrial heat exchanger condenser and evaporator1.The inner tube is the titanium or the 316L stainless steel tube spiral coil ;2.Outer is the PVC plastic shell ;3.Heat exchanger ending joints with the copper tub and copper cuts ;5.Titanium heat exchanger also can be used for the chemical galvanized part and fit for the acid cooling system ;we can design by your request or produce by your drawing picture .1) Pure seamless titanium tube .  Thickness 0.6 mm. The Grade is TA1.2) The titanium coil pressure loading capacity was designed base R410a high pressure work condition, The max. working pressure is 52 bar. and the extreme pressure was 360bar in our test.3) 100,000 times alternating pressure (Low pressure 0 bar, high pressure 52bar) test shows it can be used more than 20 years. Never corrosion.Specification:1) The data marked by orange is this model heat exchanger technical parameter. Please contact us to get the detail drawing.2) The data list is our suggested data, We can produce any capacity heat exchangers according customer requirement and design. Description:Titanium has the super strong corrosion resistant ability. Our titanium heat exchanger use seamless pure titanium tube as heat conductor, can ensure the titanium heat exchanger can be used for a long time, without any cost in the after-sale services.Due to its good properties ,the titanium heat exchanger widely used in:Swimming pool equipment, Aquarium chiller, Marine refrigerant system, Solar energy heater, Aquaculture, Pharmacy, Food industry, Electroplating industry  and some heat recovery from the waste water or exhaust gas.Main material and property: --Molded cups titanium heat exchanger1) The cups molding by high quality PVC material .2) Due to its perfect structure design, the PVC shell can stand high working pressure. The max working pressure can be 1.2 Mpa , and the bursting pressure can be 2.3Mpa.3) Its loading capacity can pass the CE, UL, ETL requirement, 100,000 times alternating pressure test ( Low pressure 0 bar , high pressure 8 bar ) shows it can be used more than 20 years.4) Good appearance, more safe in using, high efficient of heat transfer, easy for installation.  It must be your best choice. Quality Controlling :1) Research & developmentR&D is the core of products technology, it has a crucial import on products performance ,working condition, production quality, production cost and so on. Our R&D team has many years experience of heat pump, we are improving the COP technology and defrosting items.2)PurchasingIn order to control products quality ,meet engineer demand, Suoning purchasing department purchase good quality materials according to each model heat pump BOM list .Suoning demand each spare parts supplier has products testing report, and relative CCC, ISO certificated, from compressor, expansion vale and so on.3). ProductionEach worker must operate seriously according to production operating standard, pay attention to each installation link, both copper pipe welding and electric controlling connection are both finished with professional technology.4).CheckingEach heat pump must be checked seriously before leave our factory. COP, heating ca