Coiled Heater for Plastic Injection

Basic Info.Model NO.Coiled heaterTypeImmersion HeaterMaterialNi-Cr WireFormSpiral Heating ElementShapeTubularConditionNewPower SourceElectricVoltage110-240VDimension(L*W*H)CustomizedWarranty1 YearBrandKylinTrademarkASTTransport PackageCarton PackingSpecificationCustomizedOriginChinaProduct DescriptionHot runner industrial  heating tube for plastics injection machineKYLIN manufactures high quality minitubular heaters that assure the best with respect to safety and performance.Minitubular heater owes it importance to his great versatility; the possibility to reach high working temperatures in small spaces allows to support the most difficulit needs. KYLIN minitubular heater can be manufactured with differents lengths, powers and sections, and are avaliable from stock also with thermocouple built-in (type J).•     Nickel-chrome 80/20 resistance wire •     Hight purity compacted magnesium oxide •     Stainless steel sheath•     Built-in thermocouple type J•     Tig welded end disc •     PTFE insulated nickel leadwires Technical key features:Voltage: up to 250 VHigh voltage flash test (cold): 800 V (AC)Insulation resistance (cold): > 5 MΩ for 500 V (DC)Leakage current (cold): < 0.5 mA for 253 V (AC)Surface temperature: max. 750°CLength : max. 3000 mmlength tolerance: ± 5%Diameter tolerance:± 0.15 mmLeads: PTFE insulation, heat resistant up to 260°CPower tolerance (cold) Standard:±10%On request: ± 5%Sheath material: quality 1.4541Power density: max. 15 W/cm²Resistance per meter heated length: 20 to 1400ΩThermocouple: type J / KTest Following to EN 60335/2/11 & EN 60204-1