Shell& Fixed Plate Core Heat Exchanger

Shell& Fixed Plate Core Heat ExchangerIntroductionProduct DescriptionThe plate and shell heat exchanger is a heat exchanger with a plate tube as a heat transfer element, also known as a sheet heat exchanger. StructureIt is mainly composed of two parts: plate tube bundle and shell. The contact points of cold-formed pairs of slats are tightly welded together to form a plate tube containing multiple flat runners. Many plates and tubes of different widths are arranged in a certain order. In order to maintain the spacing between the plates and tubes, metal strips are inserted at both ends of the adjacent plates and tubes and welded together with the plates and tubes. Tube sheets are formed at both ends of the plate tube, so that many plate tubes are firmly connected together to form a plate tube bundle. The end face of the plate tube bundle presents a number of flat flow channel plate tube bundles assembled in the casing, and the longitudinal expansion difference is eliminated by sliding sealing between them and the casing. The cross section of the equipment is generally circular, but also rectangular and hexagonal. A fluid flows in the plate tube, and B fluid flows between the plate tubes in the shell.FeaturesThe use of this type of structured heat exchange core on a plate and shell heat exchanger can overcome the problems of the existing plate and shell heat exchanger which are difficult to clean and maintain, and are not suitable for low resistance or dirty media.Specifically, uniformly spaced spherical protrusions and spherical depressions are processed on the surface of the heat exchange plate, and the depth of the spherical depressions and spherical protrusions is 2 to 5 mm and the diameter is 8 to 15 mm. When multiple heat exchange plates are stacked together to form a fluid channel, the spherical convexity on the opposite surface of two adjacent cell plates corresponds to the spherical convexity, and the spherical concave corresponds to the spherical concave, thereby forming the formed many channels in the channel are unobstructed and can easily pass through the dirty fluid. At the same time, the heat exchange core of this structure can be cleaned by mechanical methods such as high-pressure water gun washing. All-welded plate heat exchanger / plate and shell heat exchanger is suitable for liquid-liquid, vapor-liquid, gas-liquid, gas-gas and other heat exchange processes, and can also be used as a condenser, evaporator, etc. The unique wide flow channel design is especially suitable for heating and cooling process requirements containing a large number of solid particles and fiber suspensions.  Applications in Petrochemical fieldPetrochemical fieldUsed for condensation, heating, cooling, heat recovery and reboiler processes; Applied to the heating and cooling of organic substances, such as paraffin, aromatic hydrocarbons, alcohols, aldehydes, ketones, ethers, organic acids, and fats; Applied to heating and cooling of organic acids and corrosive acids; Heating and cooling of high viscosity polymer or organic matter; Heating and cooling of mineral oil; The cooling and drying of gas, such as oxygen, hydrogen, nitrogen, carbon dioxide, etc. Other ApplicationsPharmaceutical and special chemical processesFor condensation and defogging processes;Sanitary gas condensation process;Recycling process of water vapor and solvent;Synthetic ammonia cooling process.HVAC, district heatingCirculating water heating process;Steam heating (first station of combined heat and power);Heat recovery process;Low pressure steam heat recovery process;High temperature medium heat exchange;Evaporator and condenser (suitable for any refrigerant).Energy and other fieldsAir preheater / reheater;Application in the decomposition process of alumina production seeds.About Us Company Profile If you have any other question, pls feel free to contact: Ms. Sylvie /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1