Food Grade Stainless Steel Automatic Auger Screw Conveyor

  Food Grade Stainless Steel Automatic Auger Screw Conveyor    Product Classification: conveying equipment seriesTS series screw conveyor is designed and manufactured according to JB/T 7679-95 Screw Conveyor, which is a new product of GX type screw conveyor. Product IntroductionTS series screw conveyor is designed and manufactured according to JB/T 7679-95 Screw Conveyor, which is a new product of GX type screw conveyor.TS series screw conveyor, commonly known as an auger, is a widely used conveying equipment in the mineral, feed, grain and oil, and construction industries. From the perspective of the displacement direction of conveying materials, the screw conveyor can be divided into two types: horizontal screw conveyor and vertical screw conveyor, which are mainly used for horizontal conveying and vertical lifting of various powder, granular, small, and other loose materials.Applicable IndustriesTS series screw conveyor is widely used for horizontal or inclined convey of powdery, granular, and small materials, such as building materials, the chemical industry, electric power, metallurgy, coal charcoal, grain, ash, slag, cement, grain, and other industries. The material temperature is less than 200 ºC.Note: TS series screw conveyor is not suitable for conveying perishable, viscous, and caking materials.Technical CharacteristicsTS series screw conveyor is characterized by a simple structure, small cross-section size, good sealing, reliable operation, low manufacturing cost, convenience for intermediate loading and unloading, and can be transported in reverse direction or in two opposite directions at the same time. During the conveying process, materials can also be stirred, mixed, heated, and cooled. The material flow can be adjusted through the loading and unloading gate. During use, it is necessary to maintain the tightness of the chute and the proper clearance between the spiral and the chute.TS series screw conveyor is suitable for short-distance vertical conveying. The screw of bendable screw conveyor is composed of a flexible shaft and synthetic rubber blade, which is easy to bend and can be arranged arbitrarily according to the site or process requirements for spatial transmission. The blades of the screw conveyor can be of the spot pull type and the integral pull type. The spot pull type can be made into any thickness and size. The integral pull type is not suitable for making non-standard screws.TS series screw conveyor is generally composed of a conveyor body, inlet and outlet, and drive device; The spiral blades of TS series screw conveyor can be divided into three types: solid spiral surface, belt spiral surface, and blade spiral surface. Among them, the blade spiral surface is relatively less used and is mainly used to transport materials with high viscosity and compressibility. This spiral-suspended surface type has and completes the functions of mixing and mixing materials during the transportation process.Compared with other conveying equipment, the TS series screw conveyor has the advantages of small overall section size, good sealing performance, stable and reliable operation, multi-point loading and unloading in the middle, simple maintenance, etc.Technical Parameter  TS typeTS100TS160TS200TS250TS250TS315TS400TS400TS500TS630TS800TS1000TS1250Spiral diameter(mm)10016020025025031540040050063080010001250Screw pitch(mm)100160200250250315355355400450500560630Rotating speed (t/min)1401209090907575756060453530DeliveryQφ=0.33(m³/h)2.27.611222236.466.166.193.1160223304458Power Pd1=10m(KW)1.11.52.22.42.43.25.15.14.18.6121624.4Power Pd1=30m(KW)1.62.83.25.35.38.4111115.325.9364873.3Rotating speed(r/min)120907575756060604545353020DeliveryQφ=0.33(m³/h)1.95.718181829.152.952.969.8125174261305Power Pd1=10m(KW)11.32.12.12.12.94.14.14.76.89.414.116.5Power Pd1=30m(KW)1.52.34.54.54.578.98.911.620.428.342.249.5Rotating speed(r/min)90756060604545453535302016Shaft feeding quantityQφ=0.33(m³/h)1.44.815151521.839.639.654.397149174244Power Pd1=10m(KW)0.91.21.91.91.92.53.43.44.35.48.19.513.3Power Pd1=30m(KW)1.22.23.83.83.85.46.86.89.21624.428.639.9Rotating speed(r/min)75604545453535353030201613Shaft feeding quantityQφ=0.33(m³/h)1.23.81111111731.731.746.57399.3139199Power Pd1=10m(KW)0.751.11.61.61.62.13.13.13.74.65.77.711Power Pd1=30m(KW)1.11.83.43.43.44.45.65.681416.723.233.1About TransportationAfter you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods