8+2mm Steel Cord Conveyor Belts with Fast Delivery Time

              Steel cord rubber belt used in coal mines      Belt typesStrength:630N/m----5400N/mmWidth (mm):800mm-2400mmSuch as 800mm, 900mm, 1000mm, 1200mm, 1400mm, 1500mm,1600mm,2000mm, 2200mm, 2400mm;Thickness: such as 3+1.5mm, 3+2mm, 4+2mm, 5+3mm, 6+2mm, 8+2mm etcUsageSteel cord conveyor belts are suitable for high strength, long distance, and heavy load transportation of materials, which are widely used in coalmines, mines, ports, metallurgy, electricity, chemical industries, etc.Characteristics1. High tensile strength: The belts are suitable for large span, long distance transportation of materials.2. Small elongation in use: The belts need only a very short take-up stroke distance.3. Small diameter of drive pulley: The carcass has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in service life.5. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run deviation.6. Good troughability: As the carcass has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.7. Good troughability: As the belt body has no transverse skeleton, it is easy to from a deep trough, so the belts can load more materials and prevent the materials from escaping.8. Inspection of the belt with X-rays: Users can take X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.  Standard SpecificationsThe values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.Features: high tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire ropetension, excellent troughbility and good adhesive between rubber and steel wire.Applicable environment: The belt realizes conveying a large amount of materials at long distance and at high speed in the fields of coal, mine, ports, metallurgy, electric power, chemical engineering, etc.Technical data: The steel cord conveying belt has the general used, high abrasion, cold-resistant and flame-retardant according to the using requirement and the performance of the cover rubber.  ItemST630ST800ST1000ST1250ST1600ST2000ST2500ST3150ST3500ST4000ST4500ST5000ST5400Tensile strength(N/mm)63080010001250160020002500315035004000450050005400Diameter(mm)33.54.04.55.06.07.28.18.68.99.710.911.3pitch(mm)10±1.510±1.512±1.512±1.512±1.512±1.515±1.515±1.515±1.515±1.516±1.517±1.517±1.5Top cover thickness(mm)556668888888.59Bottom cover thickness(mm)556668888888.59Width (mm)Number of steel cord ST630ST800ST1000ST1250ST1600ST2000ST2500ST3150ST3500ST4000ST4500ST5000ST5400800757563636363505050    1000959579797979646464645955551200113113949494947676777771666614001331331111111111118989909084787816001511511261261261261011011041049690901800 1711431431431431141141171171091021022000  1591591591591281281301301211131132200     1761411411441441341251252400     193155155157157146137137Note: 1. Thickness of cover rubber, Diameter of steel cord and pitch of steel cord can be customized according to the requirement of the customer after negotiation.2. The belt can be produced according to the requirement of the customer under the standards of the German DIN22131, Australia AS133, Japan JISK6369, etcPerformance of the cover rubberItemperfomanceHDLTensile strengthMPa≥24.018.015.0Elongation at break%≥450400350abrasionMm3≤12090200Adhesive strengthAdhesive of Steel cord strengthAdhesive of steel cordBefore agingAfter agingBefore agingAfter agingST6306055ST3150140130ST8007065ST3500145140ST10008075ST4000150145ST12509590ST4500165160ST160010595ST5000175170ST200010595ST5400180175ST2500130120   Minimum Pulley DiameterItemST630ST800ST1000ST1250ST1600ST2000ST2500ST3150ST3500ST4000ST4500ST5000ST5400Minimum pulley diameter (mm)500500630800100010001250140016001600160018001800TECHNICAL INDEXESOther rubber belt typesFire Resistant BeltsChemical Resistant Conveyor BeltsCold Resistant BeltsHeat resistant beltSidewall BeltingBucket ElevatorChevron Conveyor BeltsRough Top Conveyor BeltsFabricated Conveyor BeltsSteel Cord Conveyor BeltsPipe Conveyor Belts  Certificate:  FAQ: (1)Q: Are you a factory or trading company A: We are factory with export license. We have the most convenient tra