Poly Dadmac (poly dimethyl dially ammonium) for Paper Mill and Water Purifier

Our Poly DADMAC(Poly Diallyl Dimethyl Ammonium Chloride) is used for water and wastewater treatment and paper mills. Polydiallyldimethylammonium chloride (Poly DADMAC) is a homopolymer of diallyldimethylammonium chloride (DADMAC), well known as one part of  Superfloc family . These organic coagulants are liquid, cationic polymers of differing molecular weights.  They work effectively as primary coagulants and charge neutralization agents.  Poly DADMAC is often used in filtration applications or in conjunction with our flocculant products. These polymers are highly effective in many water treatment clarification processes. PolyDADMAC and/or cationic polyamines can also be used in combination with our flocculant and coagulant products to lower overall treatment costs.Poly dadmac Features:1) Technical name: Polydimethyl-dislkelen-ammonium chloride / poly dadmac2) Cationic polymer, can be completely dissolved in water, flocculant3) Appearance: Colorless, transparent colloid4) Viscosity: 1000cps - 8000 cps5) Solid content: 40%6) PH (30% solution): 3 - 77) Ionic nature: CationicPolydadmac Advantage:1, Immediately soluble at all concentrations2,Wide molecular weight ranges for specific applicationsApplication Field1. The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.2. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.3. It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.Note: our product can be made upon your special request. Application Method:1. When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.3. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.4. It is better to dose the product continuously.Packing:250L/plastic drum, 1, 000L/IBC/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1