Swimming Pool & Pond UV Disinfection Water Treatment

Detailed Product DescriptionSwimming pool, spa and public sauna maintains some level of chlorine in the water for continual disinfection. Feeding chlorine is an effective way of disinfection, but its by-products forms chloramines causing displeasure for bad smell, irritation on eyes or skin, and deterioration of the facilities. As an alternative solution UV treatment does not produce odor, is highly effective in inactivating pathogens, can reduce the quantity of chlorine feeding so that easily satisfy the visitors there.  UV in water circulationUV treatment is the most economical and effective way to protect water from biological and chemical contamination. As a well proven technology which has been applied for a long time, UV is the most adequate technique treating water in every step of the water cycle in nature, which includes underground and reservoir water through intake to river and ocean. UV is used in diverse applications such as drinking water, municipal and industrial wastewater, remediation of underground water, etc.Application1. Food processing industry, including juices, milk, drinks, beer, practical oil and canned food. 2. Electronic industry. 3. Hospitals, various laboratory and high levels of pathogenic body water disinfection. 4. Households building, residential, office buildings, hotels, restaurants, water factories. 5. Purification and disinfection of shellfish, fish cleaning and disinfection 6. Military camp, field water supply system 7. Urban wastewater disinfection. 8. Swimming pool, other recreational water disinfection 9. Thermal power, nuclear power plant industrial, central air conditioning system cooling water. 10. Biological, chemical and pharmaceutical, cosmetics for the production of cooling water. 11. Sea water, fresh water breeding, aquaculture water 12. Agricultural water disinfection UV specification Product applicationUltraviolet light treatment is a widely recognized and proven method of disinfection of water and has several advantage over other disinfection methods such as chlorination, ozonation, etc. UV light does not add anything to the water, such as, undesirable color, odor, taste, or flavor, nor does it generate harmful byproducts. It adds only energy in the UV radiation. Also, UV disinfection requires only a fraction of the contact times required by other disinfection methods. It is fast, efficient, effective, economical and environmentally-friendly. Principle of OperationUV water disinfection system design has been carefully conceived to provide adequate germicidal dosage throughout the disinfection chamber. The dosage, as it applies to UV disinfection, is a function of time and the intensity of UV radiation to which the water is exposed. Exposure time is related to the flow rate, the higher the flow rate, the lower the exposure time or the lower the flow rate, the higher the exposure time. The UV intensity is the amount of energy, per unit time, emitted by germicidal lamp. The Dosage is the product of UV intensity and the exposure time. Limitation of Use The UV water disinfection system NOT intended for the treatment of water that has an obvious contamination or intentional source, such as raw sewage, nor is the unit intended to convert wastewater to microbiologically safe drinking water. Water Quality (in) Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels Maximum Concentration Levels (Very Important) Iron≤ 0.3ppm(0.3mg/L) Hardness≤ 7gpg(120mg/L) Turbidity≤ 1NTU Manganese≤ 0.05ppm(0.05mg/L) Tannins≤ 0.1ppm(0.3mg/L) UV Transmittance≥ 750‰ Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory. UV wavelength (nm) DOSAGE is the product of intensity & time Dosage=intensity*time=micro watt/cm2*time=microwatt-seconds per square centimeter (μ W-s/cm2) Note: 1000μ W-s/cm2=1mj/cm2(milli-joule/cm2) As a general guideline, the following are some typical UV transmission rates (UVT) City water supplies850-980‰ De-ionized or Reverse Osmosis water950-980‰ Surface waters(lakes, rivers, etc)700-900‰ Ground water(wells)900-950‰ Other liquids10-990‰ Specifications:  modelProcessing capacity (Ton/Hour)power (W) inlet and outlet(inch)working pressure (Kg/cm 2 )malfunction alert for UV lampreactor dimension (cm) L×W×Hdimension of panel(cm)anchor bolt  (cm)overall weight (Kg)YLCn-0050.3161/2"6matched30×6×11  5YLCn-0081251/2"6matched47×6.3×11  10YLCn-0502401"6matched100×9×20Φ8.9×25(diameter×length)69×4×Φ125YLCn-1506801+1/4"6matched100×11×2369×4×Φ130YLCn-20081201+1/2"6matched100×15.9×30Φ8.9×45(diameter×length)69×7×Φ135YLCn-300121602"6matched100×15.9×3269×7×Φ140YLC-050240DN25/1"6matched100×8.9×3025×30×12(L×H×w)60×4×Φ145YLC-150680DN32/1 1/4 "6matched100×10.8×3060×