Sewage Water Treatment for Bio Media K1 Mbbr Media

Product Description  biofilter K1 Aquarium Filter Media  MBBR The moving bed biofilm reactor (MBBR) is an efficient biofilm technology, which combines the advantages of traditional fluidized bed. The MBBR process adds a certain amount of suspended filler (biofilm carrier) to the reactor, and in the protected area of the filler, different microorganisms (from bacteria to ciliates to rotifers) concentrate on the biofilm. Some anaerobic or aerobic bacteria are grown inside the carrier, while aerobic bacteria are grown outside. Each carrier is a micro-reactor, which ensures extensive and frequent contact between waste water and biofilms on the carrier, either through blast aeration in the aerobic treatment system or stirring in the anaerobic treatment system. While improving the mass transfer efficiency of the system, the renewal of biofilm microorganisms should be strengthened to maintain and improve the activity of biofilm. The suspended carrier and the original activated sludge form a more complex complex ecosystem and the biofilm attached to the carrier greatly increases the active biomass in the reactor. Under the joint action of suspended activated sludge and biofilm on the surface of suspended carrier, the impact load resistance capacity of the system is greatly improved, so as to improve the efficiency of sewage treatment and stabilize the effluent quality. MBBR Filter Media Product DescriptionModel: PE01Spec.: Φ12*9 mmSurface area : >800/m³Density : 0. 94-0. 97 g/m³Packing numbers : >630000 pcs/m³Dosing ratio : 15%-70% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE02Spec.: Φ11*7 mmSurface area : >900/m³Density : 0. 94-0. 97 g/m³Packing numbers : >830000 pcs/m³Dosing ratio : 15%-68% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE03Spec.: Φ10*7 mmSurface area : >1000/m³Density : 0. 94-0. 97 g/m³Packing numbers : >850000 pcs/m³Dosing ratio : 15%-70% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE04Spec.: Φ16*10 mmSurface area : >800/m³Density : 0. 94-0. 97 g/m³Packing numbers : >260000 pcs/m³Dosing ratio : 15%-67% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE05Spec.: Φ25*10 mmSurface area : >500/m³Density : 0. 94-0. 97 g/m³Packing numbers : >97000 pcs/m³Dosing ratio : 15%-65% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE06Spec.: Φ25*12 mmSurface area : >600/m³Density : 0. 94-0. 97 g/m³Packing numbers : >97000 pcs/m³Dosing ratio : 15%-65% Life span : >15 yearsNitrfication efficiency : 400-1200 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE08Spec.: Φ5*10 mmSurface area : >3500/m³Density : 1.02-1.05g/m³Packing numbers : >200000 pcs/m³Dosing ratio : 15%-70% Life span : >15 yearsNitrfication efficiency : 500-1400 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE09Spec.: Φ15*15 mmSurface area : >900/m³Density : 0.94-0.97g/m³Packing numbers : >230000 pcs/m³Dosing ratio : 15%-65% Life span : >15 yearsNitrfication efficiency : 500-1400 gNH4-N/m³.d Material : 100% Virgin HDPEModel: PE38Spec.: Φ25*10 mmSurface area : >800/m³Density : 0.94-0.97g/m³Packing numbers : >210000 pcs/m³Dosing ratio : 15%-70% Life span : >15 yearsNitrfication efficiency : 500-1200 gNH4-N/m³.d Material : 100% Virgin HDPEOur Advantages Technical advantagies of Our MBBR Filter Media1.High hydrophilicity and excellent adhesion to surfaces 2.High bio-activity and bio-film short time 3.High impact resistance and stable operation 4.Less residual sludge 5.High volume load, high filling rate and less land occupation 6.Cost-effective, easy to operate and maintain 7.Rebuild-free, easy to upgrade or expand 8.Long service life: MBBR life more than 15 years MBBR Filter Media Core Technology1.Special design of surface, stronger bio-film growth capacity; 2.Large specific surface area, high voidage, the more periphyton biomass; 3.Unique design of structure and shape according to hydromechanics, strong three-dimensional flow dynamics in the water; 4.Adding hydrophilic groups and other trace elements, the biofilm formation time only 3-15 days; 5.Excellent impact strength, strong gas shear capacity; 6.Without any holder, easy to cure, save energy and space. Applications   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1