Water Purification Water Treatment Water Filter Reverse Osmosis System Equipment

Machine Detail View: Water Purification Water Treatment Water Filter Reverse Osmosis System EquipmentHow the Reverse Osmosis Equipment Works The ro water treatment is a process in which dissolved inorganic solids (such as salts) are removed from a solution (such as water). This is accomplished by pressure of high pressure pump pushing the water through a semi permeable membrane. The membrane (which is about as thick as cellophane) allows only the water to pass through, not the impurities or contaminates. These impurities and contaminates are flushed down the drain. Ultimately, the factors that affect the performance of a Reverse Osmosis System are:Incoming water pressureWater TemperatureType and number of total dissolved solids (TDS) in the waterThe quality of the filters and membranes used in the RO System (see operating specs) How to Select the Right water treatment systemCrane Environmental has the most complete line of Reverse Osmosis equipment in the industry. To select the right Reverse Osmosis system for your application, there are four primary considerations; the type of raw water, the quality of the product water required, the capacity of product water required, and any special features such as storage, repressurization, or mounting.   Technical route and flow diagram instructionsThe technical route is as following.Raw tank-->Booster pump -->Quartz sand filter-->activated carbon filter--->Anti-scalantdosing-->Sediment filter-->High pressure pump-->RO desalination device-->Permeate tank    Water treatment System Features Materials of Construction Skid Frame: SS304 Membrane Elements:Hydranautics CAP3-8040 Membrane Housings: SS304 Low pressure piping: SS304 High pressure piping: SS304 Pump and Motor Pump: 304SS vertical multi-stage centrifugal Motor: TEFC, 380/460 VAC, 3-phase, 50/60 Hz. Standard Features 8" x 40" High rejection membrane elements 5-micron sediment pre-filter housing Automatic inlet solenoid valve PLC control Product water conductivity monitor Operating pressure gauges Product and concentrate flow meters Concentrate and recycle flow control valves Low inlet pressure switch with shutdown alarm Auto/Manual wash Optional Equipment Available Atmospheric storage tanks with level control and repressurization pump Pressurized storage vessels UV Ozone generator Membrane clean-in-place (CIP) systems Pretreatment chemical injection systems  Water Treatment System Specification :Model NoWT-RO-1000Capacity1000LPH(Liter per Hour)Nominal Recovery65-75%Nominal Salt Rejection99.60%Operating Temperature15°C-45°CDesign Temperature25°CFeed Pump 0.75KWHigh Pressure Pump 1.50KWVoltage 220V /380V/460V - 50Hz/60Hz  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1