PVC Insulated Cable XLPE Insulated Steel Tape Armoured Electric Cable

Product DescriptionProduct Parameters  ApplicationsThese cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage. The lead sheath brings an enhanced resistance to aromatic hydrocarbons.ConstructionConductorsThe conductors shall be either of Class 1 or Class 2 of plain or metal-coated annealed copper or of plain aluminium or aluminium alloy, or of Class 5 of plain or metal-coated copper in accordance with IEC 60228.InsulationXLPE material and thickness shall be as per IEC 60502-1, rated for 90ºC continuous operation.Colour Code1 CoreBrown or Blue2 CoresBrown, Blue3 CoresBrown, Black, Grey4 CoresBlue, Brown, Black, Grey5 CoresGreen/Yellow, Blue, Brown, Black, GreyAbove 5 CoresBlack Cores with White numeralsOther colours can be manufactured upon request.Assembly / Inner CoveringThe inner coverings may be extruded or lapped. For cables with circular cores, except cables with more than five cores, a lapped inner covering shall be permitted only if the interstices between the cores are substantially filled. A suitable binder is permitted before application of an extruded inner covering. The material is compatible with the insulating material,The materials used for inner coverings and fillers shall be suitable for the operating temperature of the cable and compatible with the insulating material.For halogen free cables, the inner covering and fillers shall also be halogen free compound.Optional : Lead Sheathlead or lead alloy and shall be applied as a reasonably tight-fitting seamless tube.Optional : Seperation SheathThe seperation sheath shall be of extruded PVC Type ST2 as per IEC 60502-1, or other material refer to outer sheath material.Optional: ArmourAluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum/steel tapes and copper/tinned copper wire can also be manufactured upon request.Outer SheathOuter sheath shall be of extruded PVC Type ST1/ST2 as per IEC 60502-1, Polyethylene type ST3/ST7, Halogen free compound ST8, Polychloroprene, chlorosulfonated polyethylene or similar polymers, type SE1 are also available on request.Optional : Fire Performance of Cable SheathsVoltage rating for  XLPE Power Cable                  No. x Nominal Cross Section of Conductor             No. x  mm2    1 core    2 core    3 core   3+1 core4core3+2 core4+1 core5 core0.6/1 kV 1x4 mm22x4 mm23x4 mm23x4 mm2 + 1x2.5mm24x4 mm23x4 mm2 + 2x2.5mm24x4 mm2 + 1x2.5mm25x2.5 mm21x6 mm22x6 mm23x6 mm23x6 mm2 + 1x4 mm24x6 mm23x6 mm2 + 2x4 mm24x6 mm2 + 1x4 mm25x4 mm21x10 mm22x10 mm23x10 mm23x10 mm2 + 1x6 mm24x10 mm23x10 mm2 + 2x6 mm24x10 mm2 + 1x6 mm25x6 mm21x16 mm22x16 mm23x16mm23x16 mm2 + 1x10 mm24x16 mm23x16 mm2 + 2x10 mm24x16 mm2 + 1x10 mm25x10 mm21x 25 mm22x 25 mm23x 25 mm23x25 mm2 + 1x16mm24x25 mm23x25 mm2 + 2x16mm24x25 mm2 + 1x16mm25x16 mm21x35 mm22x35 mm23x 35 mm23x35 mm2 + 1x16mm24x35 mm23x35 mm2 + 2x16mm24x35 mm2 + 1x16mm25x25 mm21x50 mm22x50 mm23x 50 mm23x50 mm2 + 1x25mm24x50 mm23x50 mm2 + 2x25mm24x50 mm2 + 1x25mm25x35 mm21x70 mm22x70 mm23x 70 mm23x70 mm2 + 1x35mm24x70 mm23x70 mm2 + 2x35mm24x70 mm2 + 1x35mm25x50 mm21x95 mm22x95 mm23x 95 mm23x95 mm2 + 1x50mm24x95 mm23x95 mm2 + 2x50mm24x95 mm2 + 1x50mm25x70 mm21x120 mm22x120 mm23x 120 mm23x120mm2 + 1x70mm24x120 mm23x120mm2 + 2x70mm24x120mm2 + 1x70mm25x95 mm21x150 mm22x150 mm23x 150 mm23x150mm2 + 1x70mm24x150 mm23x150mm2 + 2x70mm24x150mm2 + 1x70mm2 1x185 mm22x185 mm23x 185 mm23x185mm2 + 1x95mm24x185 mm23x185mm2 + 2x95mm24x185mm2 + 1x95mm2 1x240 mm2 3x 240 mm23x240mm2 + 1x120mm24x240 mm23x240mm2 + 2x120mm24x240mm2 + 1x120mm2 1x300 mm2 3x 300 mm23x300mm2 + 1x150mm24x300 mm23x300mm2 + 2x150mm24x300mm2 + 1x150mm2 Optional : Fire Performance of Cable SheathsCables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, Halogen Free material comply to IEC60754-1/2 and IEC 60684-2.The sizes to any recognized standards or customer specification can also be supplied as per customer's requirements.Company ProfileFAQ1. Are you  a manufacturer or trading company?We are a professional manufacturer. We can control your order from the first begining to the last. Welcome to visit us. We'll pick you up in Ningjin. 2. How can I get a sample to test your quality?Sample is for free but customers should pay for the courier. The courier charge can be deduct when you placed an order with a MOQ 100MM.  3. What's your Minimum Order Quantity?Normally 100m. However, the cable is very heavy. You'd better order a suitable quantity to avoid the high freight.Sea transportation is the best option. 4. Can I get a discount?Discount can be negotaited  when you placed the order.  We always try our best to provide you the best quail