Dm542 Step Drive Digital 18V~60VDC NEMA17/23 Stepper Motor Controller

DM542 step drive digital 18V~60VDC Nema17/23 stepper motor controller  Overview:Average current control, 2-phase sinusoidal output current drive8 channels output phase current settingOffline command input terminalHigh start speedHigh hording torque under high speedHigh performance, low priceOpto-isolated signal I/OOvervoltage, under voltage, overcorrect, phase short circuit protection15 channels subdivision and automatic idle-current reductionMotor torque is related with speed, but not related with step/revolutionThe connection between the driver and the two-phase hybrid stepping motor is four-wire. The motor windings are connected in parallel and inseries, and the connection method is good. The high-speed performance is good, but the driver current is large (1.73 times the motor windingcurrent). The drive current is equal to the motor winding current. FeaturesInput voltage18~60V DCOutput current1.0A~4.2A(Peak)Input current