This series meets JB/ T8667.1-1997 Technical Specifications of
Series TK Large-sized 3-phase Synchronous Motor and GB755 Basic
Technical Requirements for Rotating Motor as well as standards of
IEC. A stationary controllable silicon exciter is a used as its
excitation system. It is allowed to be directly started at full
voltage, when full-voltage starting is not allowed due to the
capacity of the power grid, it can be started at reduced voltage.
The series has many advantages, such as compact structure, high
efficiency, low noise, slight vibration, high reliability and
installation & maintenance convenience.The series is suitable to
drive reciprocating air compressor, suitable to be used in such an
indoor environment with a temperature varying with seasons, but not
more than 40oC while not less than -5oC, with less dust, and
without vapour, acid, alkali or corrosive/explosive gas.The series
adopts an enclosure protection class IP, cooling mode IC 01. For
the ones with other protection class or cooling mode, users can
negotiate with us. The series' rated voltage is 6000V, and also, we
can produce the ones with a voltage of 10,000V (allowable deviation
range: ±5%), rated power 50Hz and rated power factor 0.9 (lead).The
number of the motor's stator leads can be 3, 6, 9 or 12 as per
customer requirements. The adoption of insulation materials
with an insulation class of B or F for stator and rotor windings
(temperature rise assessed in line with class B) is helpful to
prolong the motor's service life; and because stator and rotor
winding terminals have been fixed and strapped reliably and
processed with solvent-free VPI (vacuum pressure impregnation) and
have gone through many times of tests for turn-to-turn impulse
withstand voltage and withstand voltage to ground, the motor has
excellent and reliable insulation performance, high mechanical
strength and strong moisture proofing. We can add thermodetectors
at key parts, e.g. stator windings and bearings as required by
users, so as to ensure its safe and reliable operation.Series TK is
mainly used to drive reciprocating air compressor, and can also be
used to drive water pump, fan and other general mechanical
equipment.Motor Name: High-voltage synchronous motor for TK air
compressorPower range: 250KW-5000KWSpeed range: 200-1000 r/minRated
voltage: 380V/3000V/6000V/10000VRated frequency: 50HZ/60HZPower
factor: 0.9Insulation class: FProtection level:
IP00/IP21/IP23Installation method: IM7311/IM5710Working system:
S1Excitation mode: static thyristor, other excitation methods can
also be usedConnection: YCooling method: IC01. Other forms of
motors can also be produced according to user requirements, such as
duct ventilation and air and air cooling.Altitude: no more than
1000mSlip rings can be divided into common structure or slip ring
positive pressure ventilation.This type of motor is suitable for
use in environments where the ambient air temperature does not
exceed 40 ° C and there is no serious dust, the minimum ambient air
temperature is -15 ° C, and there is no corrosive and explosive gas
in the air (which can also be made into a damp heat or
high-altitude motor).TK series air compressor motors have advanced
power factor (which can improve grid power factor), high
efficiency, high stability and high overload capability, and have
the performance that the speed does not change with the load,
especially when the speed is lower than 600r/min. The performance
is significantly better than the asynchronous motor of the same
speed.There are many types of motor products manufactured and sold
by our company. The main products are high- and low-voltage
three-phase asynchronous motors. The motor structure types include
squirrel-cage type and winding type. Among them, high-voltage
synchronous motors mainly support air compressors and mine ball
mill equipment. use. We adhere to the service tenet of "focus on
products, service with heart" and provide high-quality motor
products to customers.Our company's motor manufacturing factory
adheres to the concept of green, efficient and energy-saving
production service, pays attention to the harmonious development of
internal and external environment, builds environmentally friendly
motor manufacturing enterprises, strictly implements motor standard
process, and selects high-quality energy-saving materials to ensure
the quality of motor products.More details, welcome to call us!Q:
What are the payment terms?A: 30% T/T in advance, 70% before
shipmentQ: What is your delivery time?A: Different models with
different time, 10-90 days after order confirmed.Q: What is your
MOQ?A: It depends on model.Q: Where is your loading port?A:
Shanghai or Tianjing Port, China. /* January 22, 2024
19:08:37 */!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about Three-Phase Synchronous Motor for Tk Air Compressor
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup