Yks High Voltage Squirrel Cage Water Cooled Induction Motor

YKS series  high voltage motor is a squirrel-cage rotor water-cooled three-phase asynchronous motor. This type of motor has advanced technology, high efficiency, low noise, low vibration, reliable operation, convenient installation and maintenance. The power class, installation dimensions and electrical performance of this series of motors are in compliance with the relevant provisions of the IEC standard.The YKS high voltage three-phase asynchronous motor has a protection rating of IP44 or IP54 and a cooling method of ICW81A. YKS series high voltage AC motors can be used to drive a variety of different machines. Such as ventilators, compressors, pumps, crushers, cutting machine tools and other equipment, and can be used for prime movers in coal mines, machinery industry, power plants and various industrial and mining enterprises. YKS series  high-voltage water-cooled motor structure and installation type is IMB3. The quota is continuous quota based on continuous working system (S1). The rated frequency of the motor is 50Hz, the rated voltage is divided into 6KV, 10KV, other voltage levels or Special requirements can be agreed with the user when ordering. This type of high-voltage motor is viewed from the shaft extension end. The 2-pole motor rotates clockwise. If the user needs to rotate counterclockwise, it must be specified when ordering.The rotor of the YKS series (6KV) high voltage motor uses a reliable squirrel cage structure of cast aluminum or copper conductor. Bearings are available in both rolling and plain bearings, depending on the speed and power of the motor.YKS series  high voltage motors can be used to drive a variety of general machinery, such as: compressors, pumps, fans, crushers, cutting machines, transportation machinery and other mechanical equipment. In the mining, machinery industry, power plants and other industrial and mining enterprises as the prime mover. Used to drag blowers, coal mills, rolling mills, winches, etc. should be stated when ordering.Center height range: H355 ~ 800mmPower range: 220kW ~ 6000kWNumber of poles: 2/4/6/8/10/12Rated voltage: 3000V/33000V/6000V/6600V/10000V/11000VRated frequency: 50HZ/60HZProtection level: IP44 or IP54Insulation class: FWork system: S1 (continuous)Cooling method: IC81WInstallation form: IMB3Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)Altitude: no more than 1000mThis type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).No.Squirrel cage motorYYKKYKSY2Slip ring motorYRYRKKYRKS/1StructureBox-type construction, made up of steel plates welded with each otherCompact struction2Cooling methodIC01 or (IC11, IC21, IC31)IC611 or IC616IC81WIC4113Natural ventilation, with top mounted protection coverWith top mounted air-air coolerWith top mounted air-water cooler 4Protection typeIP23IP44 or IP54IP44 or IP54IP545InsulationF6Mounting arrangementIMB37Voltage available3kv, 3.3kv; 6kv, 6.6kv; 10kv, 11kv8Frequency available50HZ 60HZ 0-100HZYKS series high-voltage motor has excellent materials, excellent manufacturing, high efficiency, low noise, low vibration, reliable operation and convenient installation and maintenance. The stator winding of the motor is always made of Class F insulation, and is treated by vacuum pressure immersion solventless paint to make the whole stator of the motor have good integrity, good structural strength, good impact resistance, electrical performance and moisture resistance, and stator winding temperature. It is upgraded according to Class B (80k), which can greatly extend the service life of the motor.1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.2, the product packaging is protected by moisture, water plastic soft packaging3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).The motor products manufactured by our company have obtained the ISO9001 quality management management system certification, passed the CCC/COC, China energy-saving product certification, and passed the certification certificates of CE/UL/IRIS/CAS and other European and American countries. The company strictly improves the quality and efficient motor products and services for users in strict accordance with the requirements of relevant product standards.The motor products manufactur