Zgs IEEE ANSI DOE Loop Feed 13.2kv 3 Phase Pad Mounted Transformer

Three Phase Pad Mounted TransformerProduct Features:- Small with compact structure: only 1/5 to 1/3 size as the compact transformer substation(prefabricated substation) of the same rated power;- Fully sealed and insulated; safe and reliable;- Low loss, low noise, strong overload capacity;- Can be equipped with load switch, bayonet fuse, current limiting fuse, oil level gauge, pressure gauge, pressure relief valve, drain valve, surge arrestors, etc;- For its LV compartment, can be equipped with LV metering, capacitance compensation, ACB, MCCB;- Applies corrugated heat dissipation, with special process treatment, strong anti-corrosion ability;- Cold rolled plate, stainless steel or other materials can be selected for the enclosure.  Technical Specifications:ModelZGS SeriesRated capacity100~3500kVARated voltage(HV)12kV 12.47kV 13.2kV 13.8kV 15kV 34.5kV......can be customizedRated voltage(LV)380V 400V 415V 416V 420V 480V 208V......can be customizedRated frequency50Hz / 60HzVector groupDyn11, Yyn0, Dy1, Dyn1Winding materialCopper / AluminiumCore materialSilicon steelCooling methodONAN KNANInsulation levelas per IEC standardPower frequency withstand voltageas per IEC standardLightning impulse withstand voltageas per IEC standardProduct Details:                          Production Equipment:Raw materials                                                       Core slitting                                                         Core cuttingCore stacking                                                               Insulating curing                                                           HV windingLV winding                                                                      Pouring                                                                          DryingAssembly                                                                       Testing                                                                           WarehouseTest Equipment:Test transformer                                                           Voltage ratio tester                                                        Oil dielectric strength testerOil dielectric resistivity tester                                     Temperature test bench                                               Transformer integrated test bench  Company Profile:Guangdong Yuete Transformer Co., LTD,established in 2009, is a professional high-tech enterprise of manufacturing, researching and sales, and is located at No. 5 of Zhiye Road, Songxia Industrial Park, Shishan town, Nanhai, Foshan, Guangdong, China.Our main products are:-Power transformers: Oil immersed transformer, Dry type transformer, Rectifier transformer, Furnace transformer, Amorphous alloy transformer, Isolation transformer, etc.-Box type substation: Pad mounted transformer, Compact transformer substation(Prefabricated transformer), PV substation, New energy storage substation, etc.-Switchgear: High voltage switchgear, Low voltage switchgearOur products are widely used in Southeast Asia, Africa, North America, South America, Middle East, Middle Asia, etc. We have complete and effective quality control system and test system, strictly based on IEC standard, IEEE standard, ANSI standard. We have ISO, CQC, Type test report, which enhance our company's competitiveness and realize the sustainability of our development. We have over 300 employees, most of the engineering and technical staff and production staff are senior engineers and production experts who have been working in the industry for more than 10 years. Driven to provide clients with good-quality products and technical support, we offer thoughtful and rapid pre-sales and after-sales one-package services.Certificates:FAQ1. Q: Are you a manufacturer?    A: Yes, we are a professional manufacturer, specializing in Oil immersed transformer, Dry type transformer, Amorphous alloy transformer, Pad mounted transformer, Compact transformer substation, Isolation transformer, OLTC transformers, Furnace transformers, Rectifier transformers,  Switchgears, Circuit breaker, etc for over 14 years.  2. Q: What is the MOQ?    A: We accept OEM/ODM projects. The MOQ=1 unit. It would be great if you can provide technical drawing and technical specification document.  If  not, you can contact us for further communication.    3. Q: What is the production time?    A: It will take about 25-30 days based on the order requirements.  4. Q: What is the payment terms?    A: T/T, LC or Cash  5. Q: How long is the guarantee?    A: We offer 12 months(1 year) guarantee.  6. Q: How can I trust you?    A: We are the audited diamond supplier of Made-In-China. Our products are widely used in Southeast Asia, Africa, North America, South America, Middle East, Middle Asia, etc. We have complete and effective quality control system and test system, strictly based on IEC standard, IEEE standard, ANSI standard. We have ISO, CE, CCC, CQC, Type test report, which enhance our company's competitive