High Precision Low Ripple High Stability Laboratory High Voltage Power Supply with 100kv 1kw Variable Hv Output

LTP Series High Precision Laboratory High voltage DC Power SupplyPower range: 30W ~ 1KWVoltage range: 1KV ~ 40KVCurrent range: 1mA ~ 1A2U / 19-inch standard chassisPrecise voltage and current setting and measurement capabilitiesOVP, OCP, short circuit and load discharging protections etc.OverviewLTP series is high voltage power supply designed for high voltage experimental test needs with single-phase 220Vac±10% input.Its maximum output power can reach 1000W and the maximum output voltage can reach 40kV, it is featured for stable & accurate output and low output ripple.Comparing with the traditional linear HV power supply, its high-frequency switching technology can achieve faster response rate and higher efficiency with smaller size and light weight.It is a best choice for HV laboratory testing, product testing and other HV applications.FeaturesCV/CC working modes.Output voltage & current adjustable from 0 to 100%Stable & Low ripple HV output.4-digit LED digital meters display.Perfect & Complete protection functionsCompact structure, small size and light weight.Optional functionsHigh output precision up to 0.1% (+0.1%)0 ~ 10V analog signal control (standard DB interface) (+AC)RS communication interface (RS232 / RS485 optional) (+RC)SpecificationsInputVoltageSingle-phase 220V±10%Frequency50Hz/60HzOutputRated power****WOutput voltage adjusting range1KV/2KV/3KV/4KV5KV/10KV/20KV/30KV/40KV available **(For other output voltages, please contact us for details)Output current adjusting range0A ~ ****mAOutput polarityPositive or Negative (both available)Client must choose one output polarity before ordering.Output connectionHV connector made by IdealTek.Output cableHV cable, 1.5m long provided.Line regulation0.5% for no load to full load at output.Load regulation0.5% for ±10% change in input voltage.Ripple (Vr.m.s.)≤0.5%@ rated output.Efficiency≥85%Setting & DisplayOutput control mode10-turn potentiometer on front panel.Display mode41/2 LED digital displayProtection & Monitoring functionsLoad discharging protectionWhen the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.Short circuit protectionWhen a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.Over current protectionWhen the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.Over voltage protectionWhen the power supply is unloaded, the power supply works in constant voltage mode to prevent power supply from overvoltage damage.Noise≤55dBProtection degreeIP20Cooling methodForced air coolingMTBF50000 hours @ 25ºCWorking environment conditionsAmbient temperature10ºC~40ºCHumidity10%~90%(non-condensing)Height≤2000mStorage environment conditionsAmbient temperature-20ºC~60ºCHumidity10%~90%(non-condensing)Height≤4000mSize (W*H*D) (mm)200*100*300 (≤100W)500*88*600 (19'' 2U standard chassis) (>100W)Note: every power supply has 48 hours full load burn-in test @ 40ºCSafety cautionThis power module has HV output, only professional person could operate it.Please check power module as below before start-up.Keep power module clean and good ventilation.HV input & output connectors or HV load no touch anything.Please check back current of load well connected with GND bolt at the back of power module.Model listKVmAP (KW)Model110001LTP-220VAC-(N/P)1KW-1KV25001LTP-220VAC-(N/P)1KW-2KV33331LTP-220VAC-(N/P)1KW-3KV42501LTP-220VAC-(N/P)1KW-4KV52001LTP-220VAC-(N/P)1KW-5KV101001LTP-220VAC-(N/P)1KW-10KV20501LTP-220VAC-(N/P)1KW-20KV3033.31LTP-220VAC-(N/P)1KW-30KV40251LTP-220VAC-(N/P)1KW-40KVMore models are coming soon.Drawings (for reference only)200*100*300 (≤100W) (Black)2U chassis (>100W) (RAL7035) 2U chassis (>100W) (Black)  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1