FTTH 96/144/288 Cores Waterproof ABS Optic Splicing Closure

FTTH 96/144/288 cores Waterproof ABS Optic Splicing ClosureDescriptionThe fiber optic splice closures are specially designed to protect joints of optic cable. Excessive fibers can be stored in storage baskets behind the splice trays. The optical fibers are fusion on sides of the tray. One tray can splice 24 fibers; Available for 3 trays to splice a total of 72 fibers. Adopt modified PP material, with anti-UV, anti-aging and corrosion resistance material. Good quality and long service life. It is reusable.ApplicationA type of dome closure series, used for direct connection during optical fiber transmission, provides joint connection protection, with 4 small round inlet holes and 1 oval inlet hole; threaded mechanical seal; can be used for overhead, pole, wall, and buried installations. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection.  Features1. Excessive fibers can be stored in storage baskets. Easy in fiber management.2. Fully mechanical sealing. Easy installation and reentry. No other sealing adhesive tape is needed.3. Base and dome sealed with clamp and O-ring system. Cable entry ports sealed with rubber.4. The splice trays are hinged for access to any splice tray, without disturbing other trays.5. The inner parts and fixing parts are made of stainless steel6. With an earthing device protect it from damage by lightning7. Compatible with most cable types(single fiber or ribbon), and cable constructions(loose tube, central core, slotted core, modular). The product can be used in any environment (aerial, buried, handhole, manhole)and in many applications(tap-off, expressed, branch, and repair)Technical Index:1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade2. Atmospheric Pressure: 70~ 150Kpa3. Axial Tension: >2000N/ 1min4. Stretching Resistance: 2500N/ 10 square centimetre( 1min)5. Insulation resistance: >2* 104MΩ6. Voltage Strength: 15KV/ 1min, no arcover or breakdown7. Pressure in the water: 50m/72hours8. Splice tray with optical taking-in radius: 30mm. Low optical loss./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1