Xgs-Pon CATV Filter TV Mini Optical Node

FWR-XGS-1000GSD, Optical Receiver With FilterProduct Description 1. Product DescriptionIn order to refine the triple-play integrated equipment and reduce operator investment costs, in the single-fiber three-wave home solution, some users, such as elderly users, do not use broadband signals and only use CATV signals. In response to the requirements of this solution, Fullwell has produced an industry-leading triple-play optical receiver with filter series products.FWR-XGS-1000GSD uses high isolation and filtering technology to separate CATV from triply play waves. It only receives a 1550nm CATV signal. It uses high-bandwidth, high-sensitivity photocells, low-noise matching circuits, GaAs amplification, low optical power receiving, and RF-AGC technology. Receiving power range from -18 to + 2dBm, Light control AGC: -12~-2dBm, RF rated output 82dBuv.The FWR-XGS-1000GSD is also equipped with an optical power-receiving monitoring LED indicator (≥-15dBm) on the panel. FWR-XGS-1000GSD filter-type optical receiver, using a high-quality power adapter designed for 5 years of non-stop work, is an ideal optical receiver with a filter for FTTH single fiber to the home network.Our Advantages 2. Product FeaturePIN optical receiving power, -1dBm receiving sensitivity, AGC accepting range: -2 ~ -12dBm, output stable level: 82dBuv.Wide bandwidth type: 47 ~ 1000MHz working bandwidth.One fiber can receive long-range CATV RF signal and filter out PON signal that has an effect on the CATV signal.It can be used with the FULLWELL optical transmitter and WDM EDFA for FTTH triple-play transmission and coverage.Industry-leading 5V power adapter, non-stop work design for more than 5 years.It can be compatible with any FTTx PON triple-play optical network.Black plastic enclosure, exquisite texture appearance, to demonstrate brand strength.Product Parameters ItemUnitFWR-XGS-1000GSDOptical  characteristicinput wavelengthnm1310/1490,1270/1577,1550operation wavelengthnm1540~1560responsivity(A/W)≥0.9receive power rangedB+2~-18reflection lossdB≥50fiber linker/SC/APCRF characteristicbandwidth/flatnessMHz/dB45~1000output leveldBuv82±1.5(AGC: -2~-12dBm)reflection lossdB≥14(characteristic impedance75Ω)RF output impedanceΩ75(RF Output Interface Metric F)MER(Closed Equalization)dB≥25(64QAM) ≥31(256QAM)MER(Open Equalization)dB≥32(64QAM) ≥34(256QAM)Bit Error Rate(BER)/≤1×10-4CNR/CTB/CSOdB≥43/≥54/≥54(-9dBm/Nominal Level)OthersPower Supply/ConsumptionV/WExternal AC90~255V→DC5/≤2Working/Storage TemperatureºC-25~55 / -40~75Working/Storage Humidity%5~90(No Condensation)sizemm90×60×22Detailed Photos     Installation Instructions1 Power Input: FWR-XGS-1000GSD is the external power supply input port, First should be the DC+5V external voltage stabilizer output line connected to the machine POWER IN, then put DC+5V external mano-stat insert 100/240 V, DC5V Face posted power light, show Power part is regular.2 Optical Input:1540-1650nm CATV optical signal reception, clean the end face with an alcohol cotton ball before connection, when the optical signal is input, and the optical receiving power range is at +2~-15dBm, the Laser indicator in the surface turns from red to green, shows that the photoelectric part is working normally; when the optical receiving power is >+2dBm, the Laser indicator turns yellow, shows the input optical power too high alarm, when the optical power