M12 Gear Speed Sensor for Motor Speed Sensor

Product DescriptionM12 Gear speed sensor for  Textile IndustryThe core component of KJT gear speed sensor uses magnetoresistance as the detection element, and then through a new signal processing circuit, the noise is reduced and the function is more perfect. Compared with the output waveform of other types of gear speed sensors, the measured speed error is very small and the linear characteristics are in good agreement. The induction objects are magnetic materials or magnetic conductive materials, such as magnetic steel, iron and electrical steel. When the measured object has a convex (or concave) magnetic or magnetic conductive material, when it rotates with the measured object, the sensor outputs a pulse signal related to the rotation frequency to achieve the purpose of speed measurement or displacement detection.Specification:Summary:The sensor adopts the principle of electromagnetic induction to achieve the velocity measurement, It has a large output signal, No need to zoom, Anti-Interference, No external power supply needed, Can be used in harsh environment like Smoke, Oil and Gas, Water Vapors and so on. It can be replaced with the same kind of foreign products. Our products are mainly supplied with steam turbine, We have already imported 3 0 0 M W, 6 0 0 M W supporting units, It is widely used in national defense chemical industry, Textile and other fields.Working Principle:Before using make sure the gear is mounted on the shaft for speed measurement traight, Helical or Grooved disk gear all can be used ount the sensor on the bracket, Adjust the Clarence between the sensor and the gear tooth to be approx. 1mm. When the gear starts rotating with the shaft, According to the principle of electromagnetic induction, a voltage pulse signal is generated at both ends of the internal coil of the sensor, The Z-voltage pulse signal is generated when the axis is rotated, According to the type. flushGiven that NPN= Measured shaft speed in Rotation/Minute, Z= Number of gear teeth.When the gear tooth number is 60, the rotation of the axis is converted to a voltage pulse signal with frequency of f, and the signal is sent to the corresponding digital speed.How to Install:Gear Requirements:Gear Material:All kinds of magnetic steel materials are usable.Gear Modulus:More than 2Number of teeth:60Features:It is very sensitive to magnetic metal.It is used for counting, locating and testing on the gears, rack or uneven magnetic metal.Withstand harsh environment, such as oil, water, dust, etc.Excellent resolution and high repeatability.Frequency response,In-between 0 H z ~3 3 K H z can be used.Anti-electromagnetic interference is large.Suitable for MURATA 33H, NO741, 777, 778...Winding head friction roller, spindle, traverse shaft speed probe, (PG1, PG2, PG3 Model No. PA1015A) ; TEIJIN winding head, spindle and the traverse speed probe, (PU2, PU3 and PU4 Model No. EM- 014), high-speed drawing frame and so on.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1