Ksd302c 250V 16A Bimetallic Thermostat Ksd302 with Red Reset Button Thermal Switch

KSD301 temperature protector's Principle and structureThe main principle of KSD series thermostat is that one function of bimetal discs is snap action under the change of sensing temperature. The snap action of disc can push the action of the contacts through the inside structure, and then caused on of off the circuit finally. The main characteristic are the fixation of working temperature, the reliable snap action, less flashover longer working life and lessradiointerferenceKSD301 thermostat's specificationVoltage & CurrentAC 125V max 15A; AC250V 5A 10A 15A max 16AAction Temperature0~250ºCRecovery and action temperature difference0 to 25 degrees, or according to client's request.Temperature deviation:±3 / ±5 / ±10 degree or according to client's requestCircuit resistance≤50mΩ (Initial value)Insulation resistanceAC50Hz 1500V / min, no breakdown blinding (Normal State)Life cycle≥100000 timesContact typeNormally closed or Normally openTwo kinds of mounting bracketmovable or immovableTerminal typea. Terminal type: 187series of 4.8*0.5mm and 4.8*0.8mm, 250 series of 6.3*0.8mmb. Terminal Angle: bending angle: 0~90°C optionalHouseplastic or ceramic.Temperature sensor facealuminum cap or copper head.Certificate UL: E487478TUV: B1170792241003CQC ceramic: CQC15002129356CQC plastic: CQC15002129343KC ceramic: Difference of auto reset type and Manual reset type3.1. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point cannot reset until reconnecting the circuit by pushing the reset button. And then the contact points recover, reaching a purpose of connecting or disconnecting the circuit and restarting the circuit by manual reset. (Kindly reminder: 1. This type of manual reset thermostat can reset when the temperature declines 20 ° C after snap action by pressing the reset button. And 4~6 N will be advisable; Please don't use too much strength. 2. To ensure the normal function, the distance between the reset button and the close cover should not be less than 20.4mm. )3.2. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point can auto reset and start working.KSD301 bimetal thermostat's ApplicationIt is used as temperature control for household electric appliances and widely applied in coffee pots, automatic toasters, laminators, electric water pots, steam guns, steam irons, wind warmers, microwave ovens, water dispensers, etc.Open temp.Reset temp.Open temp.Reset temp.Open temp.Reset temp.-20ºC+-5ºC5ºC+-5ºC95ºC+-5ºC80ºC+-5ºC205ºC+-5ºC175ºC+-10ºC-15ºC+-5ºC5ºC+-5ºC100ºC+-5ºC80ºC+-10ºC210ºC+-5ºC180ºC+-10ºC-10ºC+-5ºC5ºC+-5ºC105ºC+-5ºC85ºC+-10ºC215ºC+-5ºC185ºC+-10ºC0ºC+-5ºC-10ºC+-5ºC110ºC+-5ºC90ºC+-10ºC220ºC+-5ºC190ºC+-10ºC5ºC+-5C-5ºC+-5ºC115ºC+-5ºC95ºC+-10ºC225ºC+-5ºC195ºC+-10ºC10ºC+-5ºC0ºC+-5ºC120ºC+-5ºC100ºC+-10ºC230ºC+-5ºC200ºC+-10ºC15ºC+-5ºC5ºC+-5ºC125ºC+-5ºC105ºC+-10ºC235ºC+-5ºC205ºC+-10ºC20ºC+-5ºC5ºC+-5ºC130ºC+-5ºC110ºC+-10ºC240ºC+-5ºC210ºC+-10ºC25ºC+-5ºC10ºC+-5ºC135ºC+-5ºC115ºC+-10ºC245ºC+-5ºC215ºC+-10ºC30ºC+-5ºC15ºC+-5ºC140ºC+-5ºC120ºC+-10ºC250ºC+-5ºC220ºC+-10ºC35ºC+-5ºC20ºC+-5ºC145ºC+-5ºC125ºC+-10ºC255ºC+-5ºC225ºC+-10ºC40ºC+-5ºC25ºC+-5ºC150ºC+-5ºC130ºC+-10ºC260ºC+-5ºC230ºC+-10ºC45ºC+-5ºC30ºC+-5ºC155ºC+-5ºC130ºC+-10ºC265ºC+-5ºC235ºC+-10ºC50ºC+-5ºC35ºC+-5ºC160ºC+-5ºC135ºC+-10ºC270ºC+-5ºC240ºC+-10ºC55ºC+-5ºC40ºC+-5ºC165ºC+-5ºC140ºC+-10ºC275ºC+-5ºC245ºC+-10ºC60ºC+-5ºC45ºC+-5ºC170ºC+-5ºC145ºC+-10ºC280ºC+-5ºC250ºC+-10ºC65ºC+-5ºC50ºC+-5ºC175ºC+-5ºC150ºC+-10ºC285ºC+-5ºC255ºC+-10ºC70ºC+-5ºC55ºC+-5ºC180ºC+-5ºC155ºC+-10ºC290ºC+-5ºC260ºC+-10ºC75ºC+-5ºC60ºC+-5ºC185ºC+-5ºC155ºC+-10ºC295ºC+-5ºC265ºC+-10ºC80ºC+-5ºC65ºC+-5ºC190ºC+-5ºC160ºC+-10ºC300ºC+-5ºC270ºC+-10ºC85ºC+-5ºC70ºC+-5ºC195ºC+-5ºC165ºC+-10ºCOr according to client's request 90ºC+-5ºC75ºC+-5ºC200ºC+-5ºC170ºC+-10ºCDRAWING AND CERTIFICATEHENGHAO SALES AND TECHNICAL SUPPORT1)Sales philosophy:        Customer first, continuing to create value for customers. 2)Customer response:   HENGHAO has improved the sales system and lean management system, well-trained sales team members foreigners, learning and research, and strive to provide customers with timely and effective solutions and products. 3)Free samples and delivery:      HENGHAO offers free standard samples and customer demand customized sample 100 or less, freight borne by the customer. Product categories covering 12 categories, thousands of models, existing stock more than 50 million. (Represented by sheet pcs)         Delivery: sample and stock, 3 to 7 days delivery; and the specific needs of a given product samples or customer order takes 4 weeks. 4)Quality Systems:       HENGHAO has improved a