60W LED Constant Voltage Waterproof Switching Power Supply (LPV-60W)

Basic Info.Model NO.LPV-60WOutput Type Single Warranty2 YearsOutput Power51 - 100WInput Voltage90~264vac, 126~373vdcConnection ModeSeries Switching Power SupplyCertificationCE, RoHSPower 60W Waterproof IP65 TrademarkCARSPA or OEMOriginWenzhou, ChinaHS Code8504401990Product Description LED Constant Voltage Waterproof Switching Power Supply 60WFeatures: 1. Constant voltage style power supply2. 170~264VAC AC input3. Small volume, low weight, high efficiency4. Protections: Short circuit/over load/over voltage/over temp5. Cooling by free air convection6. Fully encapsulated with IP67 level7. 100% full load burn-in test8. 2Year warrantyLPV-60WModelLPV-60-12LPV-60-24LPV-60-36OUTPUTDC voltage12V24V36VVoltage tolerance± 1%± 1%± 1%Rated current5A2.5A1.7ACurrent range0~5A0~2.5A0~1.7ARated power60W60W61.2WRipple& noise100mvp-p150mvp-p180mvp-pINPUTVoltage range90~264VAC, 126~373VDCFrequency47~63HzAC current1.6A/115VAC, 0.8A/230VACEfficiency82%84%84%Inrush currentcold start current 18A/115VAC, 36A/230VACPROTECTIONLeakage current< 1mA/240VACOver loadabove 115%~150% rated output power protection type: hiccup mode, auto-recovery after fault condition is removedOver voltage15.6~17.8V30.6~33.2V42.6~44.2Vprotection type: hiccup mode, auto-recovery after fault condition is removedOver temperaturewhen temperature of transistor inner node is over 150º Cprotection mode: cutoff output, auto-recovery after temperature goes downENVIRONMENTWorking temp, humidity-10º C~+60º C, 20%~90%RHStorage temp. humidity-20º C~+85º C, 10%~95%RH non condensingSAFETY Withstand vibration10~500Hz, 2G 10min/1cycle, period for 60minutes, each axesWithstand voltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVACIsolated resistanceI/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDCSTANDARDSSafety standardFit UL1012, IP67 protect levelEMC standardFit EN55022, CLASS AOTHERSDimension190*49*34mm (L*W*H)Weight/packing0.55kg/30pcs/17.5kg/0.025 m³ /0.87CUFTNOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation