Building Material Lightweight Autoclaved Aerated Concrete Precast AAC Wall Ready Building Material

Basic Info.After-sales ServiceOnline Install InstructionWarranty5 YearsCertificationCE, ISO9001Compressive Strength5.4MPaMoisture Content1Air Sound Insulation37 dB (-1;-3)Softening Coefficient0.84Flexural Capacity1.8 TimesTrademarkBeipengOriginChinaHS Code6811899000Product DescriptionPRODUCT DESCRIPTIONBeipeng lightweight partition board is material of a kind of new-type energy saving wall structure. It is a kind of wall material like hollow floor, only need to be coated with a small amount of caulking mortar when do installation. It is composed of harmless phosphogypsum, light steel slag, fly ash and other industrial waste slag, by frequency conversion steam pressure curing. Lightweight partition board has the advantages of light weight, high strength, multiple environmental protection, heat preservation and insulation, sound insulation, respiratory humidity control, fire prevention, rapid construction, reduce wall cost and so on. Only one-eighth the weight of solid brick wall, achieve C30 strength, thermal conductivity is a third of the solid brick wall, and the acoustic conductivity is only one quarter of the solid brick wall. The product can adjust the indoor air humidity, save the land occupied by industrial waste residue, put an end to the pollution of industrial waste residue to the air and water, save 15% to 20% of the wall cost, and improve the construction efficiency three to five times. Beipeng Aautoclaved aerated concrete (ACC) SpecificationThermal ConductivityMpa≥3.5Flexural capacityDeadweight multiple≥1.5Compressive strengthdB≥35Sound insulation Mpa≥7.5Compressive strength%≤1.0Moisture content%≤12Soft coefficient  ≥0.80Heat conductivityW/m2·K'---