Automatic Stainless Steel Air Tight Interior Hospital Sliding Door

Stainless Steel Air Tight Interior Hospital Sliding DoorProduct Description  The medical automatic door is a door that is generally installed in the operating room or the ICU ward for the medical staff to push in and out of the hospital bed. The medical automatic door has the function of inductive opening and safety anti-pinch. The medical staff only needs to extend the foot into the light control foot sensing box next to the entrance, and the door will automatically close. Door panel inside filled polyurethane foam with technology overall high-pressure, high-strength aluminum alloy frame, the automatic lifting large platform hydraulic pressing equipment.--Main Features: Security,heat preservation,wind resistance,sound insulation,durable.--Application Scope:Exterior & interior door of all kinds of factories and commercial buildings, especially in area with a high demand of safety.After a period of time, the door will automatically close after the cart and medical staff have fully entered. If someone or a cart is next to the door leaf, the door will not close to provide a safe anti-pinch. In addition, the door frame of the medical automatic door is made of sealed profile, which has the characteristics of high air tightness; the light control foot sensing is adopted for the entrance and exit, so that the medical staff can open the door [without contact", which can effectively isolate the bacteria and personnel.  Technical Data: Door Leafa> 1.0mm 304 stainless steel or galvanized steel with powder coating treatmentb> Filled with high-density paper honeycomb,aluminium honeycomb or rock woolc> The thickness of door leaf is 50mmDoor Frame1.5mm galvanized steel or 304 stainless steelMotorImported motor,Power Supply : AC110V / 220V 50HZOpening speed : 250 to 550 mm / sHold opening time : 2-20 sConsumption < 150WCover BoxStainless steel or galvanized steel with powder coating treatmentSeal Structurea> Embedded seal groove design with all-around EPDM weather seal rubber between frame and leafb> Thickness of EPDM seal rubber: 3mmc> Automatic seal rubber is installed at the bottom of the door leaf,which will automatically close the gap with ground floor when door is closedVision Windowa> Special clean room glass is made of double layer tempered glassb> The glass and door fan are on the same plane to avoid dust retention and easy cleaningHardware SUS 304 stainless steelWorking Temperature-20 ºC to +50 ºC --What are the details of our automatic airtight hospital door? Power voltage220 V/ 50 HzPower consumption